Hp Laserjet 5Si And 5Simx Printers - HP PCL 5 Comparison Manual

HP LaserJet 5Si
and 5SiMx Printers
HP LaserJet 5Si and 5SiMx printers are designed for using
in shared printing environments. The HP LaserJet 5SiMx
printer is equivalent to the HP LaserJet 5Si printer, but
also includes PostScript Level 2, 8 Mb of additional
memory, and the HP JetDirect network interface card.
HP LaserJet 5Si and 5SiMx printers have features similar
to those of HP LaserJet 4Si and 4SiMx printers, with
improved performance and extra paper handling features.
Some of the feature differences are listed below.
The printers include the same set of internal fonts, but
there are no font cartridge slots on the printers. Both
printers support font/macro SIMMs and downloaded soft
fonts and macros.
The default symbol set is PC-8 instead of Roman-8.
Additional paper and envelope sizes are supported,
including ledger (11" x 17"). Executive size paper is only
supported by the MP tray.
There is no job offset mechanism in the printers.
HP LaserJet 5Si and 5SiMx printers do not request
the envelope size every time the power is cycled. It is
assumed that the size does not usually change between
power down and power up.
Base HP LaserJet 5Si and 5SiMx printers have one
100-sheet multi-purpose tray (Tray 1), and two 500-sheet
universal-input trays. Optional paper handling devices
include a duplex unit, a power envelope feeder, a
2000-sheet input tray and a multi-bin mailbox.
HP LaserJet 4Si and 4SiMx printers used "tray locking"
to prevent automatic selection of a paper tray. HP
LaserJet 5Si and 5SiMx printers accomplish "tray
locking" using the Alphanumeric ID command to select
the paper tray by media type.
Table 2-15 lists the PCL feature additions for HP LaserJet
5Si and 5SiMx printers.
Printer-Specific Differences 2-75