Repeating One Element Of A Repeated Pattern - Baby Lock Urity BLTY Instruction And Reference Manual

EDITING PATTERNS
e
Adjust the spacing of the repeated pattern.
* To widen spacing, press
* To tighten spacing, press
a Press
to change a repeated pattern back to
one single pattern.
Memo
• You can only adjust the spacing of patterns
included in the red frame.
f
Complete repeated patterns by repeating
c e
steps through
g
Press to finish repeating.
Memo
• When there are two or more patterns, all
patterns will be grouped together as one
pattern in the red frame.
• When changing the direction in which the
pattern will be repeated, all of the patterns
in the red frame will automatically be
grouped as one repeating unit. Press
to change a repeated pattern back to one
single pattern. See the following section on
how to repeat one element of a repeated
pattern.
E-74
.
.
a
.
■ Repeating One Element of a
Repeated Pattern
By using the Cut function, you can select one
element of a repeated pattern and repeat only that
single element. This function allows you to design
complex repeated patterns.
a
Choose the direction in which the repeated
pattern will be cut.
* Press to cut horizontally.
* Press to cut vertically.
→ The pattern direction indicator will change
depending on the direction selected.
b
Use and
→ The cut line will move.
to select the cut line.