Changing The Needle - Baby Lock Urity BLTY Instruction And Reference Manual

CHANGING THE NEEDLE

• Always press
Start/Stop button or another operation button is pressed accidentally, the machine will start and injury
may result.
• Use only sewing machine needles made for home use. Other needles may bend or break and may cause
injury.
• Never sew with a bent needle. A bent needle will easily break and may cause injury.
Memo
• To check the needle correctly, place the flat
side of the needle on a flat surface. Check
the needle from the top and the sides.
Throw away any bent needles.
a Parallel space
b Level surface (bobbin cover, glass, etc.)
a
Press the "Needle Position" button to raise
the needle.
b
Press .
* If the message "OK to automatically lower the
presser foot? " appears on the LCD screen, press OK
to continue.
→ The entire screen becomes white, and all keys and
operation buttons are locked.
Note
• Before replacing the needle, cover the hole
in the needle plate with fabric or paper to
prevent the needle from falling into the
machine.
CAUTION
on the screen before changing the needle. If is not pressed and the
c
Use the screwdriver to turn the screw
toward the front of the machine and loosen
the screw. Remove the needle.
Note
• Do not apply pressure to the needle clamp
screw. Doing so may damage the needle or
machine.

CHANGING THE NEEDLE

Basic operations B-57
B
1