Arranging Multiple Copies Of A Single Pattern To Make All Cuts At One Time - Baby Lock BNCW Instruction And Reference Manual

USING THE MACHINE TO POSITION EMBROIDERY PATTERNS FOR CREATING CUTWORK
■ Changing the size of cutwork
patterns by using the stitch
recalculator function (For use only
with Embroidery Upgrade Kit I sold
separately)
The size of cutwork patterns cannot be changed
using the stitch recalculator function. To enlarge or
reduce the patterns, use the normal resizing mode.
a
a Frame resizing keys
b Frame positioning keys
Arranging Multiple Copies of a
Single Pattern to Make All Cuts
at One Time
We recommend the following procedure for
arranging multiple copies of a single pattern in
order to make all cuts at one time.
Note
• When arranging multiple copies of a single
pattern to make all cuts at one time, we
recommend using the table sold separately
(Part Code: ENTABLE), in order to ensure a
smooth flow of the fabric.
26
b
3 3
Memo
• The following procedure describes how to
duplicate cutwork patterns using the editing
functions built into your machine, so that all
of the cutting steps are preformed at one
time. When using a cutwork pattern
imported into the machine, start from
d
step .
a
Follow steps a and
fabric along the outline of a pattern" on
page 23.
b
Touch and then touch
b in "Cutting the
.