Setting Up Your Ip Camera Via Wireless Connection - Aztech WIPC302 User Manual

Setting up your IP Camera via Wireless
connection
1. Connect your Aztech WIPC302 into your Modem/Router's Ethernet LAN port with an
Ethernet cable.
2. Make user that your Modem/Router's Internet connection is UP to allow you to
access your IP camera via the Internet.
3. Connect the Power Adapter to your Aztech WIPC302 and plug it into the power
outlet then switch it ON.
4. Connect your computer to the same router wherein Aztech WIPC302 is connected
then launch the WIPC302 utility.
5. From the utility click the Search button to search for the IP camera then select the IP
camera that is connected to your network.
User Manual
Page 11 of 48