Advertisement
5 — Configuring Your Router
Your router is set as Transparent Bridge by factory default.
To identify your current line protocol configured, type
Check the
type
ether //bridge
ptp
atm
ether //ppp/DEVICE=1 mtu 1500
ether //ppp/DEVICE=1 mtu 1492
ppp 1 clear
ip device flush
bridge device flush
type and dev file
dev file
//edd
//bun/port=sdsl/rfc1483..
//bun
ip device/bridge device
listing to identify the protocol.
ip route
ip device.
Advertisement
Need help?
Do you have a question about the SDSL Bridge & Router and is the answer not in the manual?
Questions and answers