Baby Lock Diana BL480A Getting To Know Manual page 9

3 While holding thread with fingers,
pass it between the tension discs
and pull thread down to make
certain it is properly located in
between the tension discs.
Place the thread from right to left, into
4
the thread guide.
5 Place the thread from right to left, into
the thread guide.
6 7 & 8 Thread the balance of the lower
looper area of the machine following the
blue color-coded thread guides, placing
thread in guides.
10
9 & Thread the lower looper eye (A) from
front to back. Pull about 10cm (4 inches)
of thread and position into V cutout (B) on
looper threader. Firmly hold thread tail
with left hand and pull threader lever (C)
up into place (D).
Note: Use tweezers provided in the
accessory case to aid in threading
the looper.
7