Baby Lock Diana BL480A Getting To Know Manual page 11

3 While holding thread with fingers, pass it
between the tension discs and pull thread
down to make certain it is properly located in
between the tension discs.
Place the thread from right and to left
4
into threading guide..
5 Place the thread from right to left
into threading guide.
6 7 8 & 9 Thread the balance of the
lower looper area of the machine following
the purple color-coded thread guides,
placing thread in guides.
10
& 11 Thread the looper eye (A) from front
to back. Pull about 10cm (4 inches) of
thread and position into V cutout (B) on
threader. Firmly hold thread tail with left
hand and pull threader lever (C) up to
place thread into correct position (D) for
sewing.
Note: Use tweezers provided in the
accessory case to aid in threading
the looper.
9