Baby Lock Pro-Stitcher BLPS Instruction And Reference Manual page 42

Auto Turned Off
If the "Auto" box is left blank ("Off"), the Pro-Stitcher
performs the "Pull Up" in a manual mode and the
following will occur at the beginning of the pattern
(assuming the "On" option is selected):
1. The machine will move to the start point and take
a full stitch.
2. The motors are then disabled so the user can
manually push the machine aside and pull up the
bobbin thread.
3. The user should hold both the bobbin and top
threads and press the "Resume" button.
The machine will return to the start position and
execute the "Tie Off" stitches if that option is turned
on or start stitching the pattern if turned off.
Stitching
This option controls whether or not the machine
stitches as it moves through the pattern. A user may
wish to see how the machine moves through a pat-
tern without actually stitching the pattern. In this
case, the "Stitching" option should be turned off. It
is likely that the user would also want to turn off the
"Pull Up" and "Tie Off" options as well in that case.
After checking all the settings, press either the "Can-
cel" button to return to the previous screen or the
"Start Quilting" button to start quilting the pattern.
Page 40