Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using this machine, basic safety precautions should always be taken, including the following: Read all instructions before using. DANGER - To reduce the risk of electric shock: The machine should never be left unattended while plugged in. Always unplug the machine from the electrical outlet immediately after using and before cleaning.
Page 4 FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY If this machine is fitted with a three-pin non-rewireable BS plug, then please read the following. IMPORTANT If the available socket outlet is not suitable for the plug supplied with this equipment, it should be cut off and an appropriate three-pin plug fitted.
Page 5 1760 Gilsinn Lane, Fenton, Missouri 63026 declares that the product Product Name: Baby Lock Sewing Machine Model Number: BLL2 Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 6 In the event a malfunction occurs or adjustment is required, first follow the troubleshooting table in the back of the operation manual to inspect and adjust the machine yourself. If the problem persists, please consult your local authorized Baby Lock retailer. For additional product information and updates, visit our web site at www.babylock.com...
Page 7: How To Use This Manual
HOW TO USE THIS MANUAL Chapters 1 and 2 describe to the first-time user the initial operations for using this machine and the basic sewing operations. To sew utility stitches Continue with chapter 3 to learn how to select a stitch and sew using the various stitches. Chapter 2 Chapter 1 Chapter 3...
Page 8: Table Of Contents
CONTENTS CONTENTS NAMES OF MACHINE PARTS AND THEIR Top Stitching............. 74 Smocking ..............74 FUNCTIONS ..........9 Fagoting..............75 Machine ..............9 Tape or Elastic Attaching........... 76 Needle and Presser Foot Section ....... 10 Heirloom Stitching ............ 77 Embroidery Unit ............10 Buttonhole Stitches ...........
Page 9 Attaching the Embroidery Unit ........ 122 Selecting Embroidery Patterns/ SELECTING EMBROIDERY PATTERNS ..124 Floral Patterns/Frame Patterns/ Embroidery Patterns/Floral Patterns/ Baby Lock Exclusive Embroidery Designs ....167 Baby Lock Exclusive Embroidery Designs ....125 Alphabet Patterns ............ 168 Alphabet Patterns ............ 125 EDITING PATTERNS........170 Frame Patterns............
Page 11: Names Of Machine Parts And Their Functions
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Machine ■ Front View ■ Right-side/Rear View a Handle a Top cover When transporting the machine, carry it by this handle. Open the top cover to thread the machine and wind the bobbin. b Handwheel b Thread guide plate Turn the handwheel toward you to sew one stitch or to raise or...
Page 12: Needle And Presser Foot Section
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Needle and Presser Foot Section Embroidery Unit a Buttonhole lever a Carriage Lower the buttonhole lever when sewing buttonholes and bar The carriage moves the embroidery frame automatically when tacks. embroidering. b Presser foot holder b Release button (located under the embroidery unit) The presser foot is attached to the presser foot holder.
Page 13: Operation Buttons
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Operation Buttons Included Accessories The accessories are stored in the flat bed attachment. Open the flat bed attachment as shown below. a “Start/Stop” button When this button is pressed, the machine sews a few stitches at a low speed, then begins sewing at the speed set by the sewing speed controller.
Page 14 NAMES OF MACHINE PARTS AND THEIR FUNCTIONS 75/11 2 needles 90/14 2 needles 90/14 2 needles: Ball point needle (gold colored)
Page 15 NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Part Name Part Code Part Name Part Code Free motion open toe quilting Embroidery foot “U” XD0313-051 XE0767-001 foot “O” Buttonhole foot “A” X57789-151 Free motion echo quilting foot XE0766-001 Overcasting foot “G” XC3098-051 “E”...
Page 16: Options
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Options Part Name Part Code Side cutter foot XC3923-001 Embroidery bobbin thread (White) BBT-W Embroidery bobbin thread (Black) BBT-B Seam guide BLG-SG Embroidery frame set (small) EF73: Frame 2 cm (H) u 6 cm (W) EF77: Embroidery sheet (1 inch (H) u 2-1/2 inches (W)) 5 Cord guide bobbin cover...
Page 17: Chapter 1 Getting Ready
Chapter Getting Ready TURNING THE MACHINE ON/OFF............16 LCD SCREEN..................17 ■ Display Precautions......................17 ■ Key Functions ........................18 Using the Machine Setting Mode Key..............20 Using the Machine Operation Mode Key ..............22 ■ Contents of Each Category ....................22 Using the Pattern Explanation Key ................23 LOWER/UPPER THREADING ..............24 Winding the Bobbin ....................24 ■...
Page 18: Turning The Machine On/Off
TURNING THE MACHINE ON/OFF TURNING THE MACHINE ON/OFF WARNING • Use only regular household electricity as the power source. Using other power sources may result in fire, electric shock, or damage to the machine. • Turn the main power to OFF and remove the plug in the following circumstances: When you are away from the machine After using the machine When the power fails during use...
Page 19: Lcd Screen
LCD SCREEN LCD SCREEN ■ Display Precautions • Only touch the display with your finger or the touch pen included with the machine. Do not use a mechanical pencil, screwdriver or any other hard or sharp objects. In addition, do not press the display with extreme pressure, otherwise damage to the display may result.
Page 20: Key Functions
LCD SCREEN ■ Key Functions With your finger or the touch pen, press a key at the top of the display ( ) to change the screen that is displayed. Operation panel Name Function Page Machine setting mode Press this key to change the needle stop position, turn the buzzer on/off, adjust the pattern or screen, and change other machine settings.
Page 21 LCD SCREEN Screen Name Function Page Screen lock key Press this key to lock the screen. When the screen is locked, the various settings, such as the stitch width and stitch length, are locked and cannot be changed. Press this key again to unlock the settings. Image key Press this key to display an enlarged image of the selected stitch pattern.
Page 22: Using The Machine Setting Mode Key
LCD SCREEN Using the Machine Setting Mode Key Press to change the needle stop position, turn the buzzer on/off, adjust the pattern or screen, and change other basic machine settings. Select whether the needle stops in the raised or lowered position when the machine is stopped. Select whether to use the sewing speed controller or to adjust the zigzag width (see page 69).
Page 23 Shows the version of the software installed on this machine. Memo The latest version of software is installed in your machine. Check with your local authorized Baby Lock retailer or at www.babylock.com for notification of available updates (see page 198).
Page 24: Using The Machine Operation Mode Key
LCD SCREEN Using the Machine Operation Mode Key Basic machine operations and other information based on the contents of this Operation Manual are stored in this machine. Press to open the screen shown below. Six categories are displayed at the top of the screen. Press a key to see more information about that category.
Page 25: Using The Pattern Explanation Key
LCD SCREEN Example: Displaying information about upper Using the Pattern Explanation Key threading Press To learn more about the uses for a stitch pattern, select Press the stitch, and then press to see a description of o A list of basic operations appears in the lower half of the selected stitch.
Page 26: Lower/Upper Threading
LOWER/UPPER THREADING LOWER/UPPER THREADING Set the supplemental spool pin in the “up” Winding the Bobbin position. This section describes how to wind thread onto a bobbin. With this machine, you can use the supplemental spool pin to wind the bobbin while sewing using the main spool pin.
Page 27 LOWER/UPPER THREADING Wind the thread clockwise around the bobbin Note four or five times. When using cross-wound thread on a thin spool, use the small spool cap, and leave a small gap between the cap and the thread spool. Note Cross-wound thread •...
Page 28: Winding The Bobbin Using The Spool Pin
LOWER/UPPER THREADING Cut the thread, and then remove the bobbin. Turn on the machine. Open the top cover. Align the groove in the bobbin with the spring on the bobbin winder shaft, and then slide the bobbin onto the shaft. Note When removing the bobbin, pull up only on the bobbin.
Page 29: Setting The Bobbin
LOWER/UPPER THREADING Pass the thread through the thread guide. Press the “Presser Foot Lifter” button to raise the presser foot. Slide the bobbin cover latch to the right, and then remove the bobbin cover. Thread guide Bobbin cover Latch Pass the thread under the pin on the bobbin winding pretension disk and guide, and then Hold the bobbin with your right hand and hold pass it around the pretension disk.
Page 30: Pulling Up The Bobbin Thread
LOWER/UPPER THREADING After guiding the thread completely through While lightly holding the upper thread, press the groove, pull it toward you to cut it with the “Needle Position” button twice to lower, the cutter. then raise the needle. Cutter Attach the bobbin cover by inserting the tab in the lower-left corner of the bobbin cover, then lightly press down on the right side of Gently pull the upper thread to pull up the...
Page 31: Upper Threading
LOWER/UPPER THREADING Press the “Needle Position” button to raise Upper Threading the needle. This section describes how to thread the machine and the needle. The machine is marked with numbers that indicate the threading order. CAUTION • Be sure to thread the machine properly. Improper threading can cause the thread to tangle and break the needle, leading to injury.
Page 32 LOWER/UPPER THREADING While holding the thread from the spool with Guide the thread down, up, then down both hands, pull the thread through the lower through the groove, as shown in the notch in the thread guide plate, then through illustration.
Page 33 LOWER/UPPER THREADING Pull the thread up through the thread cutter Carefully pull the end of thread that was to cut the thread, as shown in the illustration. passed through the eye of the needle. Note Do not pull the thread strongly. Otherwise, the needle may bend or break.
Page 34: Using The Twin Needle
LOWER/UPPER THREADING Pass the thread through the needle bar thread Using the Twin Needle guide, and then thread the needle on the left side. Using the twin needle, you can sew two parallel lines of the same stitch. Although the same bobbin thread is used, interesting patterns can be sewn by threading each needle with a different color of thread.
Page 35 LOWER/UPPER THREADING While holding the thread from the spool with Press to select the setting for twin both hands, pull the thread through the lower needle sewing. notch in the thread guide plate, then through * The stitch width becomes narrower than with single the upper notch.
Page 36: Changing The Presser Foot
CHANGING THE PRESSER FOOT CHANGING THE PRESSER FOOT CAUTION • Always press in the operation panel before changing the presser foot. If is not pressed and the “Start/Stop” button or another button is pressed, the machine will start and may cause injury. •...
Page 37: Changing The Needle
CHANGING THE NEEDLE CHANGING THE NEEDLE CAUTION • Always press in the operation panel before changing the needle. If is not pressed and the “Start/ Stop” button or another operation button is pressed accidentally, the machine will start and injury may result. •...
Page 38 CHANGING THE NEEDLE Use the included screwdriver to turn the needle clamp screw toward the front of the machine to loosen it, and then remove the needle. Note Do not apply extreme force when loosening or tightening the needle clamp screw, otherwise damage to the machine may result.
Page 39: About The Needle
CHANGING THE NEEDLE ■ About the Needle The sewing machine needle is probably the most important part of the sewing machine. Choosing the proper needle for your sewing project will result in a beautiful finish and fewer problems. Below are some things to keep in mind about needles.
Page 40 CHANGING THE NEEDLE...
Page 41: Chapter 2 Sewing Basics
Chapter Sewing Basics SEWING ....................40 Sewing a Stitch......................40 ■ Using the Foot Controller....................41 ■ Using the Knee Lifter.......................42 Sewing Reinforcement Stitches ................42 Sewing Curves ......................42 Changing Sewing Direction ..................42 ■ Sewing a Seam Allowance of 0.5 cm or Less ..............42 Sewing Heavyweight Fabric ..................43 ■...
Page 42: Sewing
SEWING SEWING CAUTION • To avoid injury, pay special attention to the needle while the machine is in operation. Keep your hands away from moving parts while the machine is in operation. • Do not stretch or pull the fabric during sewing. Doing so may lead to injury. •...
Page 43: Using The Foot Controller
SEWING ■ Using the Foot Controller To stop sewing, press the “Start/Stop” button again. You can also use the foot controller to start and stop sewing. CAUTION • Do not allow fabric pieces and dust to collect in the foot controller. Doing so could cause a fire or an electric shock.
Page 44: Sewing Reinforcement Stitches
SEWING ■ Using the Knee Lifter Sewing Reinforcement Stitches Using the knee lifter, you can raise and lower the presser foot with your knee, leaving both hands free Generally stitching must be secured at the beginning to handle the fabric. and end with reverse/reinforcement stitches.
Page 45: Sewing Heavyweight Fabric
SEWING While keeping the black button on the left Sewing Heavyweight Fabric side of presser foot “J” pressed in, lower the presser foot lever. ■ If the Fabric Does Not Fit Under the Presser Foot The presser foot lever can be raised to two different positions.
Page 46: Adjusting Stitch Settings
ADJUSTING STITCH SETTINGS ADJUSTING STITCH SETTINGS When a stitch is selected, the most appropriate stitch width, stitch length, and upper thread tension are automatically set. However, if needed, you can change any of the settings as described in this section. Note •...
Page 47: Adjusting The Thread Tension
ADJUSTING STITCH SETTINGS ■ Upper Thread Is Too Loose Adjusting the Thread Tension If the upper thread can be seen on the wrong side of the fabric, press . Each press of the key increases The default thread tension, which is automatically set, the setting and makes the thread tension tighter.
Page 48: Useful Functions
USEFUL FUNCTIONS USEFUL FUNCTIONS Automatic Reinforcement Stitching Memo If you press the “Start/Stop” button to pause sewing, After selecting a stitch pattern, turn on the automatic then press it again to continue, reverse stitches (or reinforcement stitching setting before sewing, and the reinforcement stitches) will not be sewn.
Page 49: Locking The Screen
USEFUL FUNCTIONS Press to select the automatic thread Locking the Screen cutting setting. If the screen is locked before starting to sew, the various settings, such as the stitch width and stitch length, are locked and cannot be changed. This prevents screen settings from accidentally being changed or the machine from being stopped while large pieces of fabric or other projects are being sewn.
Page 50 USEFUL FUNCTIONS...
Page 51: Chapter 3 Utility Stitches
Chapter Utility Stitches SELECTING A UTILITY STITCH ...50 Tape or Elastic Attaching ........76 Heirloom Stitching..........77 ■ Stitch Selection Screens ........50 ■ Heirloom stitching/Hemstitching (1) Selecting a Stitch Pattern........51 (Daisy Stitch)............77 ■ Using the Mirror Image Key ......... 51 ■...
Page 52: Selecting A Utility Stitch
SELECTING A UTILITY STITCH SELECTING A UTILITY STITCH ■ Stitch Selection Screens Press to display the previous or next page. Straight/Overcasting/Quilting Stitches Decorative Stitches Heirloom Stitches Buttonholes/Bar tacks Multi-Directional Sewing...
Page 53: Selecting A Stitch Pattern
SELECTING A UTILITY STITCH ■ Using the Image Key Selecting a Stitch Pattern You can display an image that is an approximate size of the selected stitch. You can also check and Turn on the machine, and then lightly press change the colors of the image on the screen.
Page 54: Saving Stitch Settings
SELECTING A UTILITY STITCH Press Press to go back to the original screen. * To reset the selected stitch pattern to its default settings, press , and then press Saving Stitch Settings o The confirmation message appears. This machine is preset with the default settings for the stitch width (zigzag width), stitch length, thread tension, Press automatic thread cutting, automatic reverse/...
Page 55: Using The Sewing Type Selection Key
SELECTING A UTILITY STITCH Read the descriptions, and then select the Using the Sewing Type Selection Key appropriate stitch. * Press to scroll the page. By pressing , a utility stitch can also be selected according to its desired use. When you are not sure which stitch to select for your application or when you need information on how certain stitches are used, press...
Page 56: Sewing The Stitches
SEWING THE STITCHES SEWING THE STITCHES Straight Stitches Note When using the twin needle (see page 32), be sure to attach presser foot “J”. Stitch width Stitch length Stitch Presser Twin [mm (inch.)] [mm (inch.)] Stitch Name Applications Foot needle Auto.
Page 57: Changing The Needle Position (Left Or Middle Needle Position Stitches Only)
SEWING THE STITCHES Select a stitch pattern. At the end of the stitching, hold the “Reverse/ Reinforcement Stitch” button pressed to sew reverse stitches (or reinforcement stitches). Press the “Thread Cutter” button to trim the threads. * If the automatic thread cutting setting is selected before sewing, the machine will automatically sew Attach presser foot “J”.
Page 58: Using The Straight Stitch Needle Plate And The Straight Stitch Foot
SEWING THE STITCHES Grasp the bobbin case, and then pull it out. Memo For a standard 16 mm (approx. 5/8 inch) seam allowance, set the width to 0 mm on the screen. While sewing, align the edge of the fabric with the 16mm (approx.
Page 59: Basting
SEWING THE STITCHES ■ Basting Attach the straight stitch foot and align the edge of the fabric with a specific marking on Press , and then attach presser foot “J”. the straight stitch foot. Press the “Reverse/Reinforcement Stitch” button to sew reinforcement stitches at the beginning of the stitching.
Page 60: Darts Seams
SEWING THE STITCHES Darts Seams Gathering Sew gathers on sleeves, the waist of a gathered skirt, Press , and then attach presser foot “J”. etc. Press the “Reverse/Reinforcement Stitch” Select a straight stitch, and then attach button to sew reverse stitches at the presser foot “J”.
Page 61: Flat Fell Seams
SEWING THE STITCHES Pull the bobbin threads to create the desired Lay both seam allowances on the side of the amount of gathering, and then tie the threads. shorter one (cut seam allowance) and iron them flat. Smooth the gathers by ironing them. a Wrong side of fabric Fold the longer seam allowance around the shorter one, and then sew along the edge of...
Page 62: Pintucks
SEWING THE STITCHES Pintucks Use pin tucks to decorate blouses. Mark the positions of the folds on the wrong side of the fabric. a Wrong side of fabric Turn the fabric over, and then iron only the folds with the tip of the iron. a Surface of fabric Press , and then attach presser foot “I”.
Page 63: Zigzag Stitches
SEWING THE STITCHES Zigzag Stitches Zigzag stitches are useful for a variety of applications, including overcasting and sewing appliqués and patchwork. Note When using the twin needle (see page 32), be sure to attach presser foot “J”. Stitch Width Stitch Length Stitch Presser Twin...
Page 64: Elastic Zigzag Stitches
SEWING THE STITCHES ■ Patchwork (Crazy Quilts) ■ Sewing Curves Turn back the desired width of fabric, place it over a Shorten the stitch length setting to obtain a fine different piece of fabric, and then sew the two fabric stitch.
Page 65: Overcasting
SEWING THE STITCHES Overcasting Sew overcasting at the beginning and end of seams for skirts or pants, and at the beginning and end of all cuttings. Depending on the selected stitch, use presser foot “G” or “J” or the side cutter attachment (sold separately). ■...
Page 66: Overcasting Using Presser Foot "J
SEWING THE STITCHES ■ Overcasting Using Presser Foot “J” Stitch width Stitch length Stitch Presser Twin [mm (inch.)] [mm (inch.)] Stitch Name Applications Foot needle Auto. Manual Auto. Manual Overcasting stitch Reinforced seaming of stretch 0.0 - 7.0 0.5 - 4.0 fabric (3/16) (0 - 9/32)
Page 67: Overcasting Using The Optional Side Cutter
SEWING THE STITCHES ■ Overcasting Using the Optional Side Cutter By using the side cutter, you can do overcasting while cutting the fabric. CAUTION • Make sure to only select one of the stitches listed below. Using another stitch may cause the needle to hit the presser foot and break, possibly causing injury.
Page 68: When Sewing Straight Stitches While Using The Side Cutter
SEWING THE STITCHES Select a stitch. Start sewing. o A seam allowance is cut while the stitching is sewn. Note If the width has been adjusted, turn the handwheel by hand to check that the needle does not touch the side cutter.
Page 69: Quilting
SEWING THE STITCHES Quilting You can make beautiful quilts quickly and easily with this machine. When making a quilt, you will find it convenient to use the knee lifter and foot controller to free your hands for other tasks (see “Using the Foot Controller”...
Page 70: Quilting
SEWING THE STITCHES ■ Quilting Place one hand on each side of the presser foot to hold the fabric secure while sewing. Sewing together the quilt top, batting, and backing is called quilting. You can sew the quilt with the Memo walking foot to keep the quilt top, batting, and backing from sliding.
Page 71: Satin Stitching
SEWING THE STITCHES Check the needle drop point, and then sew Set “WIDTH CONTROL” to “ON”. The along the edge of the appliqué while making sewing speed will be adjusted using the foot sure that the needle drops slightly off the edge controller.
Page 72: Free-Motion Quilting
SEWING THE STITCHES ■ Free-motion Quilting Lower the feed dog position switch, located at the rear of the base of the machine, to With free-motion quilting, the feed dogs can be lowered (using the feed dog position switch) so that the fabric can be moved freely in any direction.
Page 73: Blind Hem Stitches
SEWING THE STITCHES Blind Hem Stitches Select a blind hem stitch to sew the hems or cuffs of dresses, blouses, pants, or skirts. Stitch Width Stitch Length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto. Manual Auto.
Page 74: Appliqués
SEWING THE STITCHES Remove the basting, and then turn over the Appliqués fabric. Use a temporary spray adhesive or basting to attach the appliqué to the fabric. a Wrong side of fabric b Surface of fabric Memo Blind hem stitches cannot be sewn if the needle does a Appliqué...
Page 75: Shell Tuck Stitching
SEWING THE STITCHES ■ Sewing Sharp Curves Attach presser foot “J”, and then sew along the edge of the fabric, making sure that the Stop the machine with the needle in the fabric needle drops slightly off the edge. outside the appliqué. Raise the presser foot and turn the fabric a little bit at a time while sewing for an attractive finish to the seam.
Page 76: Top Stitching
SEWING THE STITCHES Leave a seam when sewing the scallop Turn the fabric over so that the surface faces stitches so that the pattern is not sewn up, and then sew over the seam with the directly on the edge of the fabric. center of the presser foot aligned with the seam.
Page 77: Fagoting
SEWING THE STITCHES Pull the bobbin threads to create the desired Fagoting amount of gather, and then smooth the gathers by ironing them. Stitching across an open seam is called fagoting. It is used on blouses and children’s clothing. Separate the two pieces of fabric by about 4 mm (approx.
Page 78: Tape Or Elastic Attaching
SEWING THE STITCHES Press Tape or Elastic Attaching Note Elastic tape is sewn onto the fabric unstretched. For details on the stitch patterns, refer to the “STITCH Select a straight stitch, and then attach SETTING CHART” at the end of this manual. presser foot “J”.
Page 79: Heirloom Stitching
SEWING THE STITCHES Select a stitch, attach presser foot “N”, and Heirloom Stitching then start sewing. * Select a stitch between 3-01 and 3-22. By sewing with the wing needle (sold separately), the Drawn Work (1 needle holes are enlarged, creating a lace-like decorative stitch.
Page 80: Heirloom Stitching/Hemstitching (3) (Drawn Work (2)
SEWING THE STITCHES ■ Heirloom stitching/Hemstitching (3) (Drawn Pull out several threads from the fabric to leave a 3 mm (approx. 1/8 inch) area open. Work (2)) Memo For best result, use loosely woven fabrics. Memo Drawn work can also be sewn using the wing needle (sold separately).
Page 81: Buttonhole Stitches
SEWING THE STITCHES Buttonhole Stitches Select the desired buttonhole stitch according to your application and the size of the button. Stitch Width Stitch Length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto. Manual Auto. Manual Narrow rounded Buttonhole on light to medium 3.0 - 5.0...
Page 82 SEWING THE STITCHES Buttonholes are sewn from the front of the presser foot to the back, as shown below. a Reinforcement stitching Select a stitch, and then attach presser foot Hold the outside frame of the buttonhole foot “A”. toward the back with your finger, and then lower the presser foot so that the mark on the Mark the position and length of the fabric aligns with the marks on the buttonhole...
Page 83 SEWING THE STITCHES Pull down the buttonhole lever. Insert a pin along the inside of a bar tack at the end of the buttonhole, and then insert the * The buttonhole lever should be positioned behind seam ripper into the center of the buttonhole the metal bracket on the buttonhole foot, as shown and cut towards the pin.
Page 84: Sewing Stretch Fabrics
SEWING THE STITCHES ■ Sewing Stretch Fabrics ■ Buttons That Do Not Fit into the Button Holder Plate When sewing a buttonhole on stretch fabrics, press Use the markings on the presser foot scale to set the , and use a gimp thread. size of the buttonhole.
Page 85: Darning
SEWING THE STITCHES ■ Darning Use darning stitches for mending and other applications. Stitch Width Stitch Length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto. Manual Auto. Manual Darning Darning of medium weight fabric 2.5 - 7.0 0.4 - 2.5 (1/4) (3/32 - 1/4)
Page 86: Bar Tacks
SEWING THE STITCHES Pull down the buttonhole lever. Gently hold the end of the upper thread, and then start sewing. * The buttonhole lever should be positioned behind the metal bracket on the buttonhole foot, as shown * Once sewing is completed, the machine in the illustration.
Page 87: Bar Tacks On Thick Fabrics
SEWING THE STITCHES Position the fabric so that the opening of the Gently hold the end of the upper thread, and pocket moves toward you during sewing. then start sewing. Hold the outside frame of the buttonhole foot * Once sewing is completed, the machine toward the back with your finger, check the automatically sews reinforcement stitches, then first needle drop point, and then lower the...
Page 88: Button Sewing
SEWING THE STITCHES Button Sewing Buttons with 2 or 4 holes can be sewn on. Note Make sure that the automatic thread cutting setting is not selected when sewing on buttons. Stitch width Stitch length Stitch Presser Twin [mm (inch.)] [mm (inch.)] Stitch Name Applications...
Page 89: Eyelets
SEWING THE STITCHES ■ Attaching a 4-Hole Button When sewing is finished, pull the two ends of the upper thread between the button and the Sew the two holes toward the front. Then, raise the fabric, wind them around the shank, and then presser foot, move the fabric so that the needle goes tie them together.
Page 90: Multi-Directional Sewing (Straight Stitch And Zigzag Stitch)
SEWING THE STITCHES Use the eyelet punch to cut a hole in the Pass the free arm through the fabric. center of the stitching. Press , and then attach presser foot “N”. Multi-Directional Sewing (Straight Stitch and Zigzag Stitch) Use these stitch patterns to attach patches or emblems Memo to pant legs, shirt sleeves, etc.
Page 91: Zipper Insertion
SEWING THE STITCHES Press , and then sew seam 4. Press open the seam allowance, align the seam with the center of the zipper, and then * The fabric will move sideways, so guide the fabric baste the zipper in place. with your hands to sew straight.
Page 92: Side Zipper
SEWING THE STITCHES ■ Side Zipper Remove presser foot “J”, and then attach the presser foot holder to the pin on the right side Use for side zippers on skirts or dresses. of zipper foot “I”. Press * Be sure to select the straight stitch with the middle needle position.
Page 93 SEWING THE STITCHES Close the zipper, turn the fabric over so that the surface faces up, and then baste the other side of the zipper to the fabric. a Front of garment (wrong side of fabric) b Back of garment (surface of fabric) c Basting d Front of garment (surface of fabric) Remove the presser foot, and then attach the...
Page 94 SEWING THE STITCHES...
Page 95: Chapter 4 Character/Decorative Stitches
Chapter Character/ Decorative Stitches SELECTING STITCH PATTERNS............94 ■ Stitch Selection Screens ......................94 Selecting Decorative Stitch Patterns/7 mm Decorative Stitch Patterns/Satin Stitch Patterns/ 7 mm Satin Stitch Patterns/Cross Stitch Patterns/Utility Decorative Stitch Patterns ....95 Alphabet Patterns........................95 SEWING STITCH PATTERNS ...............97 Sewing Attractive Finishes......................97 Basic Sewing ..........................97 Adjusting Patterns ........................98...
Page 96: Selecting Stitch Patterns
SELECTING STITCH PATTERNS SELECTING STITCH PATTERNS ■ Stitch Selection Screens Press to display the screen shown below. a Decorative stitch patterns b 7 mm decorative stitch patterns c Satin stitch patterns d 7 mm satin stitch patterns e Cross stitch patterns f Utility decorative stitch patterns g Alphabet patterns (gothic font) h Alphabet patterns (handwriting font)
Page 97: Selecting Decorative Stitch Patterns
SELECTING STITCH PATTERNS To combine patterns, select the next pattern. Selecting Decorative Stitch Patterns/ * Press to check the selected pattern 7 mm Decorative Stitch Patterns/ combination. Satin Stitch Patterns/ * If the wrong pattern was selected, press 7 mm Satin Stitch Patterns/Cross erase the pattern, and then select the new stitch pattern.
Page 98 SELECTING STITCH PATTERNS Press Press to display a selection screen of characters, and then select a character. Repeat this step until you have selected all of the characters. * If a wrong character was selected, press erase the character, and then select the new character.
Page 99: Sewing Stitch Patterns
SEWING STITCH PATTERNS SEWING STITCH PATTERNS Sewing Attractive Finishes Note • To achieve the best results when sewing character/decorative stitches, check the table below for the proper fabric/ needle/thread combinations. • Other factors, such as the type or thickness of the fabric being sewn or the type of stabilizer material used, also affect the stitching.
Page 100: Adjusting Patterns
SEWING STITCH PATTERNS Press the “Start/Stop” button to stop the Adjusting Patterns machine, and then press the “Reverse/ Reinforcement Stitch” button to sew Depending on the type and thickness of the fabric being reinforcement stitches. sewn, the sewing speed, whether or not stabilizer material is used, etc., the desired result may not be achieved.
Page 101 SEWING STITCH PATTERNS Press Sew the pattern again. If the pattern still is not sewn correctly, adjust it again. Continue making adjustments until the pattern is sewn correctly. Memo You can sew with the setting screen on the display. After the pattern is sewn correctly, quit making adjustments.
Page 102: Editing Stitch Patterns
EDITING STITCH PATTERNS EDITING STITCH PATTERNS Using the editing functions, you can change the patterns in a variety of ways, such as resizing them or flipping them to create a mirror image. Memo Depending on the pattern that is selected, some editing functions may not be available. ■...
Page 103: Changing The Pattern Size
EDITING STITCH PATTERNS Changing the Pattern Size Creating a Vertical Mirror Image After selecting a stitch pattern, press until the After selecting a stitch pattern, press to flip the desired size is selected. pattern vertically. Memo • Stitch patterns entered after the pattern size was changed are added at the selected size until it is changed again.
Page 104: Selecting A Single/Repeating Pattern
EDITING STITCH PATTERNS Selecting a Single/Repeating Pattern Changing the Thread Density (Satin Stitch Patterns Only) Press to select whether the pattern is sewn repeatedly or once. After selecting a stitch pattern, press until the desired stitching density is selected. CAUTION Memo •...
Page 105: Checking The Image
EDITING STITCH PATTERNS to view any part of Checking the Image the image that extends out of the viewable display area. You can display an image that is an approximate size of the selected stitch pattern. You can also check and change the colors of the image on the screen.
Page 106: Combining Stitch Patterns
COMBINING STITCH PATTERNS COMBINING STITCH PATTERNS Stitch patterns, such as character stitches, satin stitches, cross stitches and decorative stitches, can be combined in a wide variety of ways. In addition, you can create interesting variations by combining stitch patterns of different categories, sizes, and orientations.
Page 107 COMBINING STITCH PATTERNS Press Memo • Press to erase the last pattern entered. Patterns are erased one at a time. • If the entire combined pattern cannot be displayed, press to view an image of the pattern. Press to return to the previous screen. Press o The image of the pattern appears.
Page 108: Combining Stitch Patterns Of Different Sizes
COMBINING STITCH PATTERNS Combining Stitch Patterns of Different Press again, and then press so that Sizes it appears as Example: o The second pattern is displayed in the smaller size. Press To repeatedly sew the pattern combination, press so that it appears as o The combination appears as a repeating pattern.
Page 109: Combining Stitch Patterns Of Different Lengths
COMBINING STITCH PATTERNS Press To repeatedly sew the pattern combination, press so that it appears as Press o The combination appears as a repeating pattern. Combining Stitch Patterns of Different Lengths Press Press again, and then press so that it appears as o The second pattern is flipped horizontally.
Page 110: Creating Step Patterns (7 Mm Satin Stitch Patterns Only)
COMBINING STITCH PATTERNS Creating Step Patterns (7 mm Satin Press , and then press once so that Stitch Patterns Only) it appears as Stitch patterns that are shifted to create a step-shaped pattern are called step patterns. Step patterns can be created by using shift 7 mm satin stitch patterns.
Page 111: Examples Of Pattern Combinations
COMBINING STITCH PATTERNS ■ Examples of Pattern Combinations Press , and then press o The next pattern is moved to the right. Press again, and then press Press so that it appears as o The combination appears as a repeating pattern.
Page 112: Using The Memory Function
USING THE MEMORY FUNCTION USING THE MEMORY FUNCTION Stitch Data Precautions Observe the following precautions when using stitch data other than that created and saved in this machine. ■ Types of Stitch Data that can be Used • Only .pmu stitch data files can be used with this machine. Using data other than that created using this machine may cause the machine to malfunction.
Page 113: Precautions On Using The Computer To Create And Save Data
USING THE MEMORY FUNCTION ■ Precautions on Using the Computer to Create and Save Data • If the name of the stitch data file/folder cannot be identified, for example, because the name contains special characters, the file/folder is not displayed. If this occurs, change the name of the file/folder. We recommend using the 26 letters of the alphabet (uppercase and lowercase), the numbers 0 through 9, “-”, and “_”.
Page 114: Saving Stitch Patterns In The Machine's Memory
USING THE MEMORY FUNCTION ■ If the Memory Is Full Saving Stitch Patterns in the If this screen appears while you are trying to save a Machine’s Memory pattern on the machine’s memory, the memory is too full to hold the currently selected stitch pattern. To save the stitch pattern in the machine’s memory, You can save often-used stitch patterns in the machine’s you have to delete a previously saved stitch pattern.
Page 115: Saving Stitch Patterns To Usb Media (Commercially Available)
USING THE MEMORY FUNCTION Press Saving Stitch Patterns to USB Media (Commercially Available) When sending stitch patterns from the machine to USB media, plug the USB media into the machine’s USB port. Depending on the type of USB media being used, either directly plug the USB device into the machine’s USB port or plug the USB Card Writer/Reader into the machine’s USB port.
Page 116: Saving Stitch Patterns To The Computer
USING THE MEMORY FUNCTION Press Saving Stitch Patterns to the * Press to return to the original screen without Computer saving. Using the included USB cable, connect the sewing machine to your computer so that stitch patterns can be retrieved from and saved to your computer. Note Do not turn off the machine while the “Saving”...
Page 117: Retrieving Stitch Patterns From The Machine's Memory
USING THE MEMORY FUNCTION Press Retrieving Stitch Patterns from the Machine’s Memory Press Press o Press to return to the previous screen without saving the stitch pattern. o The pocket selection screen appears. Select a stitch pattern to be retrieved. * Press so that the pattern saved in that pocket appears.
Page 118: Retrieving Stitch Pattern From Usb Media
USING THE MEMORY FUNCTION Press when there are subfolders Press to sort two or more stitch patterns to USB media, the stitch patterns in the subfolders * Press to delete the stitch pattern. are displayed. o The selected stitch pattern is retrieved and the a Folder names sewing screen appears.
Page 119: Retrieving Stitch Patterns From The Computer
USING THE MEMORY FUNCTION Press Retrieving Stitch Patterns from the * Press to delete the stitch pattern. Computer Plug the USB cable connectors into the corresponding USB port connectors on the computer and on the machine (see page 114). On the computer, open “My Computer”, and then go to “Removable Disk”.
Page 120 USING THE MEMORY FUNCTION Press CAUTION • When disconnecting the USB cable: Before disconnecting the USB cable, click the “Unplug or Eject Hardware” icon in the taskbar of ® Windows Me/2000 or the “Safely Remove ® Hardware” icon in the taskbar of Windows Then, when the removable disk has been removed safely, disconnect the USB cable from the computer and the machine.
Page 121: Chapter 5 Embroidery
■ Copyright Information............124 Sewing Embroidery Patterns ..........142 ■ Pattern Selection Screens ............124 Embroidery Patterns/Floral Patterns/ Embroidering Appliqué Patterns ........143 Baby Lock Exclusive Embroidery Designs ....... 125 ADJUSTMENTS DURING THE EMBROIDERY Alphabet Patterns ............125 PROCESS............145 Frame Patterns..............126 Embroidery Cards ............
Page 122: Before Embroidering
BEFORE EMBROIDERING BEFORE EMBROIDERING The embroidering procedures are listed below. 6, 8 1, 2 Step # Operation Page Attach embroidery foot “U”. Insert a 75/11 home sewing machine needle.* Attach the embroidery unit. Wind the bobbin with embroidery bobbin thread, and then set the bobbin. 24, 27 Attach stabilizer material to the fabric, and then hoop it in the embroidery frame.
Page 123: Attaching Embroidery Foot "U
BEFORE EMBROIDERING Use the included screwdriver to loosen the Attaching Embroidery Foot “U” presser foot holder screw, and then remove the presser foot holder. CAUTION • When attaching a presser foot, always press in the operation panel. You may accidentally press the “Start/Stop” button and possibly cause injury.
Page 124: Attaching The Embroidery Unit
BEFORE EMBROIDERING Insert the embroidery unit connector into the Attaching the Embroidery Unit connection port, and then lightly push in the embroidery unit until it snaps into place. CAUTION • Do not move the machine with the embroidery unit attached. The embroidery unit could fall off and cause injury.
Page 125: Removing The Embroidery Unit
BEFORE EMBROIDERING ■ Removing the Embroidery Unit Press Press , and then press o The carriage moves to the storage position. CAUTION • Always remove the embroidery frame before pressing . Otherwise, the frame may strike the embroidery foot, and possibly cause injury. •...
Page 126: Selecting Embroidery Patterns
The screen that appears differs depending on the card that is inserted. Patterns saved in the Patterns saved in Patterns saved on the Baby Lock Exclusive machine’s memory USB media computer Embroidery Designs Press to display the previous or next page.
Page 127: Embroidery Patterns/Floral Patterns/Baby Lock Exclusive Embroidery Designs
SELECTING EMBROIDERY PATTERNS Continue with “VIEWING THE SEWING Embroidery Patterns/Floral Patterns/ SCREEN” on page 128. Baby Lock Exclusive Embroidery * To select a different embroidery pattern, press Designs . (After a confirmation message to delete the selected pattern appears, the pattern selection screen appears.)
Page 128: Frame Patterns
SELECTING EMBROIDERY PATTERNS Continue with “VIEWING THE SEWING SCREEN” on page 128. Press to display a selection screen of characters, and then select a * To select a different character, press character to be embroidered. (After a confirmation message to delete the selected pattern appears, the pattern selection screen * To change the size, press until the desired...
Page 129: Embroidery Cards
• Only insert or remove the embroidery card when is displayed, or when the machine is turned off. • Store embroidery cards in their protective cases. • Please see your Baby Lock retailer for embroidery cards available.
Page 130: Viewing The Sewing Screen
VIEWING THE SEWING SCREEN VIEWING THE SEWING SCREEN Using the editing keys, you can change the patterns in a variety of ways, such as resizing them or rotating them. Shows the code for the appropriate presser foot. When embroidering, be sure to use embroidery foot “U”.
Page 131: Preparing The Fabric
PREPARING THE FABRIC PREPARING THE FABRIC CAUTION • Use fabrics with a thickness of less than 3 mm (approx. 1/8 inch). Using fabrics thicker than 3 mm (approx. 1/8 inch) may cause the needle to break. • When using layers with thicker batting etc., you can sew more attractive embroidery by adjusting the embroidery presser foot height in the embroidery settings screen (see below).
Page 132: Hooping Fabric In The Embroidery Frame
PREPARING THE FABRIC Hooping Fabric in the Embroidery Frame ■ Types of Embroidery Frames Extra Large Large Medium Small (Sold Separately) Embroidering area: Embroidering area: Embroidering area: Embroidering area: 26 cm u 16 cm (approx. 10 - 1/4 18 cm u 13 cm (approx. 7 inches u 10 cm u 10 cm (approx.
Page 133: Inserting The Fabric
PREPARING THE FABRIC ■ Inserting the Fabric Gently stretch the fabric, and then securely tighten the frame adjustment screw so that Note the fabric remains stretched. If the fabric is not taut, the pattern may be misaligned or the fabric may pucker. Follow the procedure described below to gently stretch the fabric in the embroidery frame so that the fabric is not loose.
Page 134: Embroidering Small Fabrics And Fabric Edges
PREPARING THE FABRIC ■ Embroidering Small Fabrics Place the embroidery sheet in the inner frame, and then align the guide lines on the When embroidering small pieces of fabric, use embroidery sheet with the marks on the temporary spray adhesive to attach the small piece fabric.
Page 135: Attaching The Embroidery Frame
ATTACHING THE EMBROIDERY FRAME ATTACHING THE EMBROIDERY FRAME Note Before attaching the embroidery frame, set the bobbin. Press the “Presser Foot Lifter” button to raise Lower the frame-securing lever so that it is level the presser foot. with the frame to secure the embroidery frame in the embroidery frame holder.
Page 136: Editing The Pattern
EDITING THE PATTERN EDITING THE PATTERN CAUTION • After the size of the pattern has been changed, check the icons for the embroidery frames that can be used and use only the indicated frames. If a frame other those indicated is used, the presser foot may strike the embroidery frame, possibly causing injuries.
Page 137: Changing The Pattern Position
EDITING THE PATTERN Changing the Pattern Position Rotating the Pattern Press Press Press to move the pattern. Press * Press to move the pattern in the direction of the arrow on the key. * Press to center the pattern. a Distance from the center Press o The sewing screen appears.
Page 138: Changing The Pattern Size
EDITING THE PATTERN Select the angle that the pattern is rotated. Press o The sewing screen appears. * Press to rotate the pattern 90 degrees to the left. * Press to rotate the pattern 90 degrees to the Changing the Pattern Size right.
Page 139: Creating A Horizontal Mirror Image
EDITING THE PATTERN Change the size of the pattern. Creating a Horizontal Mirror Image * Press to reduce the size of the pattern. Press * Press to enlarge the size of the pattern. * Press to return the pattern to its original size. Press a Size of the pattern Memo...
Page 140: Changing The Stitching Density (Alphabet And Frame Patterns Only)
EDITING THE PATTERN Changing the Stitching Density Changing the Color of Single (Alphabet and Frame Patterns Only) Characters Combined alphabet patterns can be sewn with each Press letter in a different color. If “MULTI COLOR” is set, the machine stops after each character is sewn so that the thread can be changed to one of a different color.
Page 141: Checking The Pattern
CHECKING THE PATTERN CHECKING THE PATTERN Checking the Embroidering Position Press to select the position to be The embroidery frame is moved to indicate the checked. embroidering position. Closely watch the frame to check that the pattern will be sewn at the correct place. Press o The frame moves to indicate the selected position.
Page 142: Previewing The Pattern
CHECKING THE PATTERN Previewing the Pattern Press Press to select the frame used in the preview. * Embroidery frame icons that appear in light gray cannot be selected. * Press to enlarge the preview of the embroidery pattern. Memo • Press the “Start/Stop” button to sew the pattern as it appears in this screen.
Page 143: Sewing An Embroidering Pattern
SEWING AN EMBROIDERING PATTERN SEWING AN EMBROIDERING PATTERN Sewing Attractive Finishes There are many factors that go into sewing beautiful embroidery. Using the appropriate stabilizer (see page 129) and hooping the fabric in the frame (see page 130) are two important factors mentioned earlier. Another important point is the appropriateness of the needle and thread being used.
Page 144: Sewing Embroidery Patterns
SEWING AN EMBROIDERING PATTERN Follow steps from “Setting the bobbin” on Sewing Embroidery Patterns page 27. Memo If you use threads other than those listed above, the embroidery may not sew out correctly. Example: To embroider Note • Before embroidering, check that there is enough thread in the bobbin.
Page 145: Embroidering Appliqué Patterns
SEWING AN EMBROIDERING PATTERN Trim off the excess thread at the beginning of Embroidering Appliqué Patterns the stitching. If the thread is hidden under the presser foot, raise the presser foot, and then There are some patterns which call for an appliqué cut the thread.
Page 146 SEWING AN EMBROIDERING PATTERN After sewing is finished, remove the appliqué Apply a thin layer of adhesive or spray fabric from the embroidery frame, and then adhesive to the back of the appliqué piece, carefully cut along the stitching. and then attach it to the base fabric at the appliqué...
Page 147: Adjustments During The Embroidery Process
ADJUSTMENTS DURING THE EMBROIDERY PROCESS ADJUSTMENTS DURING THE EMBROIDERY PROCESS Raise the frame-securing lever, and then If the Bobbin Runs Out of Thread remove the embroidery frame. * Be careful not apply strong force to the fabric at this When the bobbin begins to run out of thread during time.
Page 148: If The Thread Breaks During Sewing
ADJUSTMENTS DURING THE EMBROIDERY PROCESS Press If the Thread Breaks During Sewing Press the “Start/Stop” button to stop the machine. If the upper thread broke, rethread the machine. If the bobbin thread broke, follow the instructions in steps through from the previous section to reinstall the bobbin.
Page 149: Restarting From The Beginning
ADJUSTMENTS DURING THE EMBROIDERY PROCESS Restarting from the Beginning Automatically Resuming Embroidery When the Power Goes Off Press The current color, stitch number and design position are saved when the power is interrupted during embroidering. The next time that the machine is turned on, you can resume embroidering.
Page 150: Manually Resuming Embroidery After Turning Off The Power
ADJUSTMENTS DURING THE EMBROIDERY PROCESS Press Manually Resuming Embroidery After Turning Off the Power Example: If the power is turned off while sewing the second color Select the pattern and press Memo If you want to start a new operation, press so the pattern selection screen appears.
Page 151: Adjusting The Thread Tension
ADJUSTMENTS DURING THE EMBROIDERY PROCESS , or to advance the Adjusting the Thread Tension pattern to slightly before where sewing stopped. When embroidering, the thread tension should be set so that the upper thread can be slightly visible from the wrong side of the fabric.
Page 152: Automatic Thread Cutting (End Color Trim)
ADJUSTMENTS DURING THE EMBROIDERY PROCESS ■ If the Upper Thread Is Too Tight ■ If the Upper Thread Is Too Loose The upper thread is too tight when the bobbin The upper thread is too loose when there are loose thread is visible from the right side of the fabric.
Page 153: Changing The Embroidering Speed
ADJUSTMENTS DURING THE EMBROIDERY PROCESS Changing the Embroidering Speed Changing the Thread Color Display From the following, select the thread color that appears Press in the embroidery color order display. You can change the thread color display on embroidery screen to the Press in the “MAX EMBROIDERY thread color name, the time to embroider each step or...
Page 154 ADJUSTMENTS DURING THE EMBROIDERY PROCESS Example: Displaying the thread number of Press “EMBROIDERY” Press Press beside on P. 2 of the screen to select the “#123”. o The thread color display is changed. o “EMBROIDERY” appears at the bottom. Press to select the thread brand.
Page 155: Using The Memory Function
USING THE MEMORY FUNCTION USING THE MEMORY FUNCTION Embroidery Data Precautions Observe the following precautions when using embroidery data other than that created and saved in this machine. CAUTION • When using embroidery data other than our original patterns, the thread or needle may break when sewing with a stitch density that is too fine or when sewing three or more overlapping stitches.
Page 156: Computers And Operating Systems With The Following Specifications Can Be Used
USING THE MEMORY FUNCTION ■ Computers and Operating Systems with the Following Specifications can be Used • Compatible models: IBM PC with a USB port as standard equipment IBM PC-compatible computer equipped with a USB port as standard equipment • Compatible operating systems: Microsoft Windows Me/2000/XP (Windows 98SE requires a driver.
Page 157: Saving Embroidery Patterns In The Machine's Memory
USING THE MEMORY FUNCTION ■ If the Memory Is Full Saving Embroidery Patterns in the If the following screen appears, either the maximum Machine’s Memory number of patterns have been saved or the pattern that you want to save takes a lot of memory, and the machine cannot save it.
Page 158: Saving Embroidery Patterns To Usb Media (Commercially Available)
USING THE MEMORY FUNCTION Press Saving Embroidery Patterns to USB Media (Commercially Available) When sending embroidery patterns from the machine to USB media, plug the USB media into the machine’s USB port. Depending on the type of USB media being used, either directly plug the USB device into the machine’s USB port or plug the USB Card Reader/ Writer into the machine’s USB port.
Page 159: Saving Embroidery Patterns To The Computer
USING THE MEMORY FUNCTION Press Saving Embroidery Patterns to the * Press to return to the original screen without Computer saving. Using the included USB cable, connect the sewing machine to your computer so that embroidery patterns can be retrieved from and saved to your computer. Note Do not turn off the machine while the “Saving”...
Page 160: Retrieving Embroidery Patterns From The Machine's Memory
USING THE MEMORY FUNCTION With the pattern that you want to save Retrieving Embroidery Patterns from displayed in the sewing screen, press the Machine’s Memory Press Press * Press to return to the previous screen without saving the pattern. o The pocket selection screen appears. Select a pattern to be retrieved.
Page 161: Retrieving Embroidery Patterns From Usb Media (Commercially Available)
USING THE MEMORY FUNCTION Press Press the key of the pattern you want to retrieve. * Press to return to the original screen. o The sewing screen appears. Retrieving Embroidery Patterns from Press USB Media (Commercially Available) You can retrieve a specific embroidery pattern from either directly USB media or a folder in the USB media.
Page 162: Retrieving Embroidery Patterns From The Computer
USING THE MEMORY FUNCTION Press Retrieving Embroidery Patterns from the Computer Plug the USB cable connectors into the corresponding USB port connectors on the computer and on the machine (see page 157). The “Removable Disk” icon appears in “My Computer” on the computer. o The pattern selection screen appears.
Page 163 USING THE MEMORY FUNCTION Press a Amount of memory used by the selected pattern o The sewing screen appears. CAUTION • When disconnecting the USB cable: Before disconnecting the USB cable, click the “Unplug or Eject Hardware” icon in the taskbar of ®...
Page 164: Embroidery Applications
EMBROIDERY APPLICATIONS EMBROIDERY APPLICATIONS Apply a thin layer of fabric glue or temporary Using a Frame Pattern to Make an spray adhesive to the back of the appliqué piece cut out in step , and then attach the Appliqué (1) appliqué...
Page 165: Using A Frame Pattern To Make An Appliqué (2)
EMBROIDERY APPLICATIONS Remove the embroidery frame from the Using a Frame Pattern to Make an machine, and then cut around the outside of the stitching. Appliqué (2) This is a second method for making appliqués using embroidery patterns. With this method, there is no need to change the fabric in the embroidery frame.
Page 166 EMBROIDERY APPLICATIONS...
Page 167: Chapter 6 Embroidery Edit
■ Enlarge or Reduce Patterns....................166 ■ Create Mirror Images ....................166 ■ Change Character Spacing ....................166 ■ Change Character Appearance/Layout................166 SELECTING PATTERNS TO EDIT ............167 Selecting Embroidery Patterns/Floral Patterns/Frame Patterns/Baby Lock Exclusive Embroidery Designs ....................167 Alphabet Patterns....................168 EDITING PATTERNS................170 ■ Key Functions ........................170 Moving the Pattern....................171...
Page 168: Available Editing Functions
AVAILABLE EDITING FUNCTIONS AVAILABLE EDITING FUNCTIONS With the Embroidery Edit functions, you can change the size of patterns, rotate patterns, adjust the character spacing and layout, and perform many other editing operations. In addition, characters and patterns can be combined and rearranged within the 26 cm u 16 cm (approx.
Page 169: Selecting Patterns To Edit
* For details on selecting patterns, see page 125 and Patterns saved in USB media (see page 159). page 126. Patterns saved on the computer (see page 160). Baby Lock Exclusive Embroidery Designs Memo For details on the pattern selection screen, see page 124 or the “Quick Reference Guide”.
Page 170: Alphabet Patterns
SELECTING PATTERNS TO EDIT Press Alphabet Patterns With the Embroidery Edit functions, you can edit the appearance of a character at the same time that you enter it. Press o The selected pattern appears in the screen. Continue with “EDITING PATTERNS” on page 170.
Page 171 SELECTING PATTERNS TO EDIT Press to change the layout of the Press pattern. o The embroidery edit screen appears. Layout of characters Continue with “EDITING PATTERNS” on page 170. Memo The layout of the characters appears in the upper-left corner of the screen. Select the layout.
Page 172: Editing Patterns
EDITING PATTERNS EDITING PATTERNS Shows the size of the entire combined pattern. Shows the size of the pattern currently selected. Shows the distance from the center of frame. Shows the degree of rotation for the selected pattern. Shows the number of colors in the selected design. ■...
Page 173: Moving The Pattern
EDITING PATTERNS Select the angle that the pattern is rotated. Moving the Pattern * Press to rotate the pattern 90 degrees to the left. * Press to rotate the pattern 90 degrees to the Press to move the pattern in the direction right.
Page 174: Changing The Size Of The Pattern
EDITING PATTERNS Press Select the direction in which the size is changed. * Press to reduce the pattern proportionately. * Press to enlarge the pattern proportionately. * Press to reduce the pattern vertically. * Press to enlarge the pattern vertically. * Press to reduce the pattern horizontally.
Page 175: Deleting The Pattern
EDITING PATTERNS Press Changing the Configuration of Character Patterns Press Deleting the Pattern Press to select the pattern to be deleted. Select the layout. Continue touching until the red frame * After selecting an arc layout, press encloses the pattern you wish to delete. Then press expand the arc.
Page 176: Changing The Character Spacing
EDITING PATTERNS Changing the Character Spacing Changing the Color of Each Character in a Pattern Press Press so that it appears as . The machine will stop after each character is embroidered so the thread can be changed. Press * Press to widen the character spacing.
Page 177 EDITING PATTERNS Press to choose a new color If necessary, press to change the thread color display (see “Changing the from the color palette. Thread Color Display” on page 151). * You can scroll through 25 colors at a time using * To return to the original color, press .
Page 178: Creating A Custom Thread Table
EDITING PATTERNS to select one of the thread Creating a Custom Thread Table brands in the machine. You can create a custom thread table containing the thread colors that you most often use. You can select thread colors from the machine’s extensive list of thread to enter a color’s 4-digit number.
Page 179: Choosing A Color From The Custom Thread Table
EDITING PATTERNS Press to return to the original screen. Choosing a Color from the Custom Thread Table You can select a color from the up to 300 thread colors you have set in the custom thread table. Press ■ Adding a Color to the Custom Thread Table from the List Repeat the previous steps through...
Page 180: After Editing
EDITING PATTERNS Press After Editing Press Color palette/Custom thread change key Color palette o The custom thread table will appear. Press to choose a new color Press to embroider the edited from the custom thread table. pattern. * Use to scroll through the custom * Press to return to the embroidery edit screen.
Page 181: Combining Patterns
COMBINING PATTERNS COMBINING PATTERNS This section will describe how to combine characters and embroidery patterns. Press Editing Combined Patterns Press Press Press on P. 1 of the screen.
Page 182 COMBINING PATTERNS Press Enter “WELCOME”. * For details on selecting characters, see page 125. * After entering “W“, press to change the size to M, then enter the remaining characters. * Press to view an image of all entered characters. Press Press...
Page 183 COMBINING PATTERNS Press to change the layout of the Press characters. * For details, see page 173. Press Press to adjust the position of the characters.
Page 184: Sewing Combined Patterns
USING THE MEMORY FUNCTION Sewing Combined Patterns Embroider according to the color order on the right side of the screen. Combined patterns will be embroidered in the order that they were entered. In this example, the embroider order will be as follows. For details, see “Sewing Embroidery Patterns”...
Page 185: Chapter 7 Appendix
Chapter Appendix CARE AND MAINTENANCE ..............184 Cleaning the LCD ....................184 Cleaning the Machine Casing ................184 Cleaning the Race ....................184 Cleaning the Bobbin Case ..................185 ADJUSTING THE SCREEN ..............186 Screen Visibility Is Low ..................186 Touch Panel Is Malfunctioning ................186 TROUBLESHOOTING ...............188 ERROR MESSAGES................191 ■...
Page 186: Care And Maintenance
CARE AND MAINTENANCE CARE AND MAINTENANCE CAUTION • Be sure to unplug the machine before cleaning it. Otherwise, electric shock or injury may result. Grasp the bobbin case, and then pull it out. Cleaning the LCD If the surface of the LCD is dirty, lightly wipe it with a soft dry cloth.
Page 187: Cleaning The Bobbin Case
(stopper) is touching the bracket spring. embroidering with bobbin thread recommended by (Follow steps from the previous Baby lock) or XC8167-451 (no color on the screw) section.) (for embroidering with bobbin threads from other manufacturers)), contact your authorized retailer (see page 141).
Page 188: Adjusting The Screen
ADJUSTING THE SCREEN ADJUSTING THE SCREEN Screen Visibility Is Low Touch Panel Is Malfunctioning If the screen is difficult to read when the machine is If the screen does not respond correctly when a key is turned on, follow the procedure described below. pressed (the machine does not perform the operation or performs a different operation), follow the procedure Turn off the machine, hold your finger...
Page 189 ADJUSTING THE SCREEN Using the included touch pen, lightly touch the center of each , in order from 1 to 5. * If the buzzer sounds one time after you press number 5, the operation is finished, and the mark below 1 appears in black.
Page 190: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING If you have a minor problem with your sewing machine, check the following solutions. If the solutions suggested do not correct the problem, contact your authorized retailer. Memo This machine is equipped with a simple troubleshooting feature that can be used in case minor problems occur during sewing.
Page 191 TROUBLESHOOTING Problem Cause Solution Page High-pitched sound while Dust or lint is caught in the feed dogs. Remove the dust or lint. sewing Pieces of thread are caught in the race (bobbin Clean the race (bobbin case). case). The upper threading is incorrect. Check the procedure for threading the machine and rethread it correctly.
Page 192 TROUBLESHOOTING Problem Cause Solution Page Needle breaks The needle is installed incorrectly. Reinstall the needle correctly. The needle clamp screw is not tightened. Tighten the needle clamp screw. The needle is bent or blunt. Replace the needle with a new one. The thread or needle is not suitable for the type Check the table of fabric, thread and needle of fabric being sewn.
Page 193: Error Messages
ERROR MESSAGES ERROR MESSAGES If the “Start/Stop button” or the “Reverse/Reinforcement Stitch” button is pressed before the machine is correctly set up or if an incorrect operation is performed, the machine stops and informs you of the error with an alarm and an error message.
Page 194 ERROR MESSAGES This message is displayed when This message is displayed when you the upper thread is broken or not try to use the needle threader lever threaded correctly, and the “Start/ while twin needle sewing is set. Stop” button or the “Reverse/ Reinforcement Stitch”...
Page 195 ERROR MESSAGES This message is displayed when This message is displayed when the memory in the USB media is is pressed while a utility full and the stitch or pattern cannot be saved. stitch is selected. This message is displayed when This message is displayed when a stitch other than a buttonhole stitch is pressed while the...
Page 196 ERROR MESSAGES This message is displayed when This message is displayed when the “Start/Stop” button, “Reverse/ the machine is turned on while the Reinforcement Stitch” button is needle is lowered and the pressed while no pattern is embroidery unit is attached. selected.
Page 197 ERROR MESSAGES This message is displayed when This message is displayed when the “Reverse/Reinforcement Stitch” is pressed without an button is pressed while the embroidery unit is attached. embroidery card inserted. This message is displayed when This message is displayed when the “Start/Stop”...
Page 198: Alarm
ERROR MESSAGES This message is displayed when a This message is displayed when button on the screen is pressed the needle plate is removed with while the needle is lowered. the machine on or when the single- hole needle plate is installed when the machine is turned on in the embroidery or embroidery edit mode.
Page 199: Specifications
SPECIFICATIONS SPECIFICATIONS Item Specification 51.1 cm (W) u 30.5 cm (H) u 25.8 cm (D) (approx. 20-1/8 inches Sewing Machine Dimensions (W) u 12 inches (H) u 10-1/8 inches (D)) 58.2 cm (W) u 31.9 cm (H) u 28.4 cm (D) (approx. 22-7/8 inches Case dimensions (W) u 12-1/2 inches (H) u 11-1/8 inches (D)) Weight...
Page 200: Upgrading Your Machine'ssoftware
UPGRADING YOUR MACHINE’S SOFTWARE UPGRADING YOUR MACHINE’S SOFTWARE You can use USB media or a computer to download software upgrades (file extension .up1) for your sewing machine. • Memo • When the machine’s software is upgraded, saved combinations of character and decorative stitches are erased. However, saved embroidery patterns are not erased.
Page 201: Upgrade Procedure Using Computer
UPGRADING YOUR MACHINE’S SOFTWARE Press Upgrade Procedure Using Computer • While holding the “Presser Foot Lifter” button pressed, turn on the machine. o The following screen appears. Press o The message “Saving the upgrade file. Do not turn main power to OFF.” will appear. When the following screen appears, upgrading is completed.
Page 202 UPGRADING YOUR MACHINE’S SOFTWARE...
Page 203: Stitch Setting Chart
STITCH SETTING CHART STITCH SETTING CHART Note When using the twin needle (see page 32), be sure to attach presser foot “J”. Stitch Width Stitch Length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto. Manual Auto.
Page 204 STITCH SETTING CHART Stitch Width Stitch Length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto. Manual Auto. Manual Overcasting stitch Reinforcing of heavyweight 2.5 - 5.0 1.0 - 4.0 fabric (3/16) (3/32 - 3/16) (3/32) (1/16 - 3/16) Overcasting stitch Reinforcing of medium,...
Page 205 STITCH SETTING CHART Stitch Width Stitch Length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto. Manual Auto. Manual Blind hem stitch Hemming woven fabrics 1.0 - 3.5 3m o3 (1/16) (1/16 - 1/8) Blind hem stitch Hemming stretch fabric 1.0 - 3.5 3m o3...
Page 206 STITCH SETTING CHART Stitch Width Stitch Length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto. Manual Auto. Manual Hemstitching Decorative hems, triple straight 1.0 - 7.0 1.5 - 4.0 at left (1/16) (1/16 - 1/4) (3/32) (1/16 - 3/16) ( J )
Page 207 STITCH SETTING CHART Stitch Width Stitch Length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto. Manual Auto. Manual Hemstitching Decorative hems, smocking 1.5 - 7.0 1.0 - 4.0 (15/ (1/16 - 1/4) (1/16) (1/16 - 3/16) Hemstitching Decorative hems, smocking 1.5 - 7.0...
Page 208 STITCH SETTING CHART Stitch Width Stitch Length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto. Manual Auto. Manual Eyelet For making eyelets, holes on 7.0 6.0 5.0 7.0 6.0 5.0 belts, etc. (1/4 15/64 3/ (1/4) (1/4 15/64 3/16) (1/4)
Page 209: Index
INDEX INDEX elongation key ................101 embroidery accessories ..................11 automatic thread cutting ............150 air vent ...................9 edges or corners ..............132 alarm ..................196 key functions ................128 alphabet patterns restarting from the beginning ..........147 character/decorative stitches .............95 ribbons or tape ............... 132 alternate bobbin case ............
Page 210 INDEX image key ............... 51 quilting ..................67 free-motion ................70 key functions character/decorative stitches ........... 100 reinforcement stitching ............42 embroidering ................128 retrieving utility stitches ................18 character/decorative stitches ...........115 knee lifter ................9 embroidery patterns ..............158 knee lifter slot ................. 9 from computer ...............
Page 211 INDEX top stitching ..................74 touch pen ................13 holder ..................9 trial key ..................139 upgrading ...................198 upper threading ................29 twin needle ................32 USB media retrieving ................ 116 saving ................113 usable ................110 USB port connector for computer ............. 9 for media ..............9 utility stitches key functions ................18 pattern explanation key .............23...
Page 212 INDEX...
Page 214 English 882-U82 XE6350-001 Printed in Taiwan...

Baby Lock Ellageo PLUS BLL2 Instruction And Reference Manual

Table of Contents

Chapter 1 Getting Ready

Chapter 2 Sewing Basics

Chapter 3 Utility Stitches

Chapter 4 Character/ Decorative Stitches

Chapter 5 Embroidery

Chapter 6 Embroidery Edit

Chapter 7 Appendix

Quick Links

Chapters

Related Manuals for Baby Lock Ellageo PLUS BLL2

Summary of Contents for Baby Lock Ellageo PLUS BLL2