Manual/Channel; Handlebar Control; Computer Control; Channel Locks - Baby Lock Pro-Stitcher BLPS Instruction And Reference Manual

Manual/Channel

This screen is intended to allow the user to quickly
change between free motion quilting and Pro-
Stitcher quilting and provide them with access to
the "Channel Lock" feature (Figure 60).

Handlebar Control

Baby Lock Crown Jewel users have handlebar con-
trol all the time, even while the Pro-Stitcher is in
control, so this step is not necessary for those users.

Computer Control

Pressing "Computer Control" passes control back to
the Pro-Stitcher. It has the same effect as pressing
the "Connect" button.
Page 54

Channel Locks

Press one of these buttons to activate the chan-
nel lock for the desired direction. The button will
turn green to indicate it is active. Press the same
button again to disable the channel lock. With the
"Horizontal Channel Lock" enabled, the Pro-Stitcher
will allow the user to move the quilting machine
horizontally while locking the vertical motor. With
the "Vertical Channel Lock" enabled, the horizontal
direction is locked so the user can only quilt vertical
lines.
Note: To use "Absolute Free-Motion," physically
disengage the motors from the racks by using the
disengagement levers on the right-hand side of the
carriage (looking at it from the front). For disen-
gagement, both silver levers should be raised. To re-
engage the motors for computerized quilting, move
these levers to the lowest position. Keep in mind
that if the levers are disengaged, the Horizontal and
Vertical channel locks will not function since they
are locked in place with the Pro-Stitcher motors.
Figure 60