Full Modem Test - Aztech ADSL2/2+ Modem User Manual

Packet size
Number of echo request
4. Click Test.
The ping results are displayed in the page. If the ping test was successful, it
means that the TCP/IP protocol is up and running. If the Ping test failed, you
should restart the router.

Full Modem Test

This test is used to check if your modem is properly connected to the network.
To perform a Full Modem test:
1. From the Advanced Menu, select Diagnostics. This opens the Diagnostics page.
2. Click Full Modem Test. This opens the Modem Test page.
3. Select your connection and then click Test.
User Manual
Page 87 of 93