Page 7
1. Introducing DSL TURBO 900 Package ADSL Transmits LED (TX) ADSL Status LED (LINK) ADSL Receive LED (RX) Ethernet Activity LED (ACT) Power LED (PWR) Ethernet Link LED (LINK)
Page 8
1. Introducing DSL TURBO 900 Package Power Connector (DC IN) Power Switch (PWR) Ethernet Jack (ETHERNET) Serial Port (SERIAL) Line Jack (LINE) Phone Jack (TEL)
Page 9
2. Before You Begin DSL TURBO 900 DSL TURBO 900 Installation CD NC1100 NetCard DSL TURBO 900 User’s Manual Power adapter UTP Crossover Ethernet cable (RJ-45) Power cable Telephone cable (RJ-11)
Page 16
3. Setting Up NC1100 NetCard If you encounter any problems with the pre-installed driver, or if you need to perform any update of driver to your NC1100 NetCard, carry out the following steps:...
Page 17
3. Setting Up NC1100 NetCard If you encounter any problems with the pre-installed driver, or if you need to perform any update of driver to your NC1100 NetCard, carry out the following steps:...
Page 18
3. Setting Up NC1100 NetCard For Windows ® 9x, you need to have Microsoft Dial-Up Networking, version 1.3 installed in your system. If you already have it installed in your system, please proceed from step 2. Else, from the Update Device Driver Wizard, click Cancel.
Page 21
3. Setting Up NC1100 NetCard ® For Windows 9x, you need to have Microsoft Dial-Up Networking, version 1.3 installed in your system. If you already have it installed in your system, please proceed from step 2. Else, from the Update Device Driver Wizard, click Cancel.
Page 23
3. Setting Up NC1100 NetCard If you encounter any problems with the pre-installed driver, or if you need to perform any update of driver to your NC1100 NetCard, carry out the following steps:...
Page 29
4. Setting Up DSL TURBO 900 Telephone 2 Telephone 1 DSL TURBO 900 The Mains Micro-Filter Supply LINE LINE Power adapter 10Base-T (UTP Crossover Ethernet cable to NC1100 NetCard)
Page 30
4. Setting Up DSL TURBO 900 Power off your computer and any connected devices before installing your modem! NC1100 NetCard ETHERNET Rear view of a PC Rear view of DSL TURBO 900 UTP Crossover Ethernet cable...
Page 31
4. Setting Up DSL TURBO 900 LINE Telephone wall socket Telephone cable Rear view of DSL TURBO Telephone set Rear view of DSL TURBO Phone cable...
Page 32
4. Setting Up DSL TURBO 900 The Mains DC IN Power adapter Power cable Rear view of DSL TURBO...
Page 35
5. Installing WinPoET Dialer & DSLTEST The screen captures in this manual are included for your easy installation. The exact screens or screens information you see on your system may vary, depending on your system configurations. For any dissimilarities, follow closely to your online instructions.
Page 39
6. Configuring Your Ethernet Card (optional) Proceed with the following configurations only if you are running the DSLTEST utility for DSL TURBO 900.
Page 40
6. Configuring Your Ethernet Card (optional)
Page 41
7. Connecting to the Internet If you are not able to establish your Internet connection, please refer to Appendix C - Troubleshooting Guide on ‘I am not able to connect to the Internet.’...
Page 43
8. Uninstalling WinPoET Dialer & DSLTEST ® For Windows 98 Second Edition users, Windows will need your Windows CD-ROM to complete the uninstallation of WinPoET software. Please have the CD-ROM by your side before proceeding.
Page 54
C. Troubleshooting Guide Mains Supply Power adapter Rear view of be greater than 10cm DSL TURBO Telephone wall socket Telephone cable (RJ-11) - ADSL Line...
Page 55
C. Troubleshooting Guide Test Description Result=FAIL To test if your driver is installed Interface test Re-install your modem driver. properly. To check if your system is Modem test communicating with the modem. Check with your Internet ADSL Service Provider. To check if the Internet Network test connection is ok.
Need help?
Do you have a question about the DSL TURBO 900 Package and is the answer not in the manual?
Questions and answers