Detectors; Motion Detection - Axis Q6032-E PTZ User Manual

AXIS Q6032-E PTZ Dome Network Camera

Detectors

Detectors

Motion Detection

Motion detection is used to generate an alarm whenever movement starts or stops in the camera view.
Motion detection is configured by defining up to 10 Include and Exclude windows:
Include windows — define areas where motion should be detected
•
Exclude windows — define areas within an Include window that should be ignored (areas outside Include windows
•
are automatically ignored).
Set Up Motion Detection Windows, on page 28
For instructions, see
To control the number of motion detection alarms, the parameters Object Size, History and Sensitivity can be adjusted. See
Detection Parameters, on page 29
Once motion detection windows are configured, the Axis product can be configured to perform actions when motion is detected.
Possible actions include uploading images and start recording. For more information, see
Note
Using the motion detection feature may decrease the product's overall performance.
Set Up Motion Detection Windows
To set up a motion detection Include Window, follow these instructions:
1. Go to Detectors > Motion Detection.
2. Select the Configure Included Windows option and click New. Select the new window in the list of windows and enter
a descriptive name.
3. Adjust the size (drag the bottom right-hand corner) and the position (click on the text at the top and drag to the desired
position) of the window.
4. Adjust the Object Size, History and Sensitivity profile sliders (see
motion within an active window is indicated by red peaks in the Activity window.
5. Click Save.
To exclude parts of the include window, select the Configure Excluded Windows and position the exclude window within the
include window.
.
.
Setting Up an Action Rule, on page 32
Motion Detection Parameters
28
Motion
.
for details). Any detected