SSM-24 Megaport
Board Telco Connector
Pinouts
Wiring to Terminal
Devices
DB-25 Wiring
3-4
The wiring of the telco connectors on the SSM-24 Megaport Board is
shown in Figure 3-3. Connector A provides ports 1-12 and is identical
to the SSM-12 connector. Connector B provides ports 13-24.
Various accessories may be used to connect devices to Megaport SS
ports. The two primary wiring methods are: DB-25 wiring and
modular wiring.
Figure 3-3. SSM- 24 Megaport Board telco connector pinouts
DB-25 distribution panels are used to convert 50-pin connectors to
DB-25 RS-232 connectors (see Figure 3-4).
Figure 3-4. DB-25 cable wiring
Equinox Megaport SS Board Series Hardware Manual