Table of Contents
Advertisement
Telco Connector
Pinouts
SSM-8 Megaport
Board Pinouts
SSM-12 Megaport
Board Telco Connector
Pinouts
Port to Device Cabling
This part of Chapter 3 lists the cable pinouts of the ports. The physical
ports are mapped by the device driver into UNIX/XENIX tty device
names.
Port one is the upper most port on the back of the SSM-8. See Figure
3-9 for RS232 pinout information.
Figure 3-2 shows the wiring of the telco connector on the SSM-12
Megaport Board. A single cable provides all the signals required for
supporting 12 ports.
Figure 3-2. SSM-12 Megaport Board telco connector pinouts
3-3
Advertisement
Table of Contents
