Table of Contents
Advertisement
Adapter Cable
Overview
Included with each Megaport 12/24 SS Board is an adapter
cable. The adaptor cable is connected to the board and
terminates with one or two 50-pin telco connector (illustrated in
Figure 1-2). These connectors are attached to any one of a
variety of splitters and distribution panels for device connection.
The cable used with Model SSM-12 Megaport boards terminates
with one telco connector providing port connections for up to 12
devices. The cable used with Model SSM-24 Megaport Boards
terminates with two telco connectors and provides port
connections for up to 24 devices.
Cable used with
SSM-12
Megaport Board
Figure 1-2. Cable used with SSM-12 and SSM-24 Megaport Boards
The Megaport SSM-8 board has eight 6-wire RJ-11 connectors
on the back of the board.
Cable used with
SSM-24
Megaport Board
1-3
Advertisement
Table of Contents
