Installation Overview - Avocent AutoView 3100 Installer/User Manual
Hide thumbs
Also See for AutoView 3100:
- Specifications (2 pages) ,
- Installer/user manual (185 pages) ,
- Specification sheet (2 pages)
Table of Contents
Advertisement
6
AutoView 3100/3200 Switch Installer/User Guide
Installation overview
The general procedure for setting up and installing the AutoView 3100/3200 switch is as follows:
•
Unpack the AutoView 3100/3200 switch and verify that all components are present and in
good condition.
•
Make all hardware connections between the power source, AutoView 3100/3200 switch, target
devices and the Ethernet.
•
Turn on the power and verify that all connections are working.
•
Configure the AutoView 3100/3200 switch using the console menu interface.
•
Make the appropriate mouse setting adjustments.
Figure 2.1 on page 7 illustrates a basic configuration for the AutoView 3100/3200 switch, using the
AutoView 3100 switch as a model for the example.
Hide quick links:
Advertisement
Table of Contents
