Figure 3.2: Oscar Interface Setup Dialog Box - Avocent AutoView 3100 Installer/User Manual

Figure 3.2: OSCAR Interface Setup Dialog Box

Assigning target device names
Use the Names dialog box to identify target devices by name rather than by port number. The
Names list is always sorted by port order. You can toggle between displaying the name or the EID
number of each AVRIQ module, so even if you move the target device to another port, the name
and configuration will be recognized by the switch.
NOTE: If a target device is turned off, its respective AVRIQ module will not appear in the Names list.
To access the OSCAR interface Names dialog box:
1. If the OSCAR interface is not open, press
2. Click Setup - Names to open the Names dialog box as shown in Figure 3.3.
Chapter 3: Local Port Operation
. The Main dialog box appears.
Print Screen
17