another computer) with the SSID you wish to connect is shown here.
Scan result includes 6 types of information, they are:
A
A
The SSID (Service Set Identifier) of wireless device. If nothing is displayed here, it
means the SSID of this wireless device is hidden.
If a
symbol appears in front of the name of wireless device, means you've
established connected with that wireless device.
B
The type of this wireless device and the channel number of this wireless device.
Means this wireless device is an access point
Means this wireless device is a computer (Ad-Hoc mode, point-to-point
connection)
C
The wireless standard supported by this access point.
'n' for 802.11n
WPS icon
will appear when the access point supports WPS. If the
access point uses encryption, a key icon
Note: When the access point supports WPS and WPS icon
see the key icon
D
Shows the signal strength of access point by percentage.
E
Shows the bar graph of the signal strength.
B
C
, 'g; for 802.11g
here even through the access point uses encryption.
D
, and 'b' for 802.11b
will appear.
17
E
.
is appeared, you will not