Table of Contents
Advertisement
IV. Advanced Feature
WPS (Wi-Fi Protected Setup) is a simple, alternative way to establish
connections between WPS compatible devices when using the Wi-Fi Adapter
on a Windows computer. When WPS is activated in the correct manner for
two compatible devices, they will automatically connect to each other without
a password required.
V-1. Software WPS
1. To support WPS, driver installation is a prerequisite. Please refer to section
III to install the driver first.
2. On your Wi-Fi Router or AP, press and hold the WPS button for a short
while to activate WPS.
Please check the instructions of your Wi-Fi
Router or AP to activate the WPS correctly.
3. On the USB adapter, please refer to section III-3-1-2 and skip "Enter
Password" if the procedures are correct.
4. The process takes a short while to establish connection. Once it's done, you
can access the Internet immediately.
15
WPS Button
Advertisement
Table of Contents
