Audio Technica AT-PL50 Installation And Operating Manual
  1. Manuals
  2. Brands
  3. Audio Technica Manuals
  4. Turntable
  5. AT-PL50
  6. Installation and operating manual

Audio Technica AT-PL50 Installation And Operating Manual

Automatic stereo turntable system
Hide thumbs Also See for AT-PL50:
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

Automatic Stereo
Turntable System
AT-PL50
Installation and Operation

Advertisement

Table of Contents
loading

Related Manuals for Audio Technica AT-PL50

Summary of Contents for Audio Technica AT-PL50

  • Page 1 Automatic Stereo Turntable System AT-PL50 Installation and Operation...
  • Page 2 Introduction Warning: To prevent fire or shock hazard, do not expose this appliance to rain or moisture. Thank you for purchasing the AT-PL50. Audio-Technica has Attention: Pour prévenir feu ou choc been a leading manufacturer of innovative stereo phonograph électrique, ne pas exposé l’appareil à la pluie products for more than 40 years.

  • Page 3: Initial Setup

    Initial Setup Figure 1 Inputs and pre-amp selector switch “AUX” PHONO Amplifier White Input Jacks Pre-amp Selector Switch Setting the Pre-amp Switch Figure 2 Assembling the turntable For increased flexibility of use, this turntable has an internal 2a Drive belt stereo phono pre-amplifier.

  • Page 4: Operation

    To use either adapter cable, connect the turntable's red and white RCA-type plugs to the cable adapter's RCA-type jacks. * When using either cable adapter, always set the AT-PL50 turntable’s Pre-amp Selector Switch to the “ON” position. (Switch is located under the AT-PL50 turntable platter.)

  • Page 5: Replacing The Stylus

    Figure 5 Caution: When the tone arm reaches the end of the record, it will lift and return to the tone arm rest automatically. When this happens, do not interfere with the tone arm’s motion, or damage to the mechanism may occur.

  • Page 6: Troubleshooting

    Troubleshooting Turntable does not operate Figure 10 Checking the drive belt Make certain the turntable’s AC cord is plugged into an AC outlet, and that the AC outlet is “live.” Check the drive belt to make certain it is on correctly. (See Figure 10.) A) Remove the record mat from the turntable platter (Fig.

  • Page 7: Tips For Better Performance

    Troubleshooting, continued Specifications Turntable operates, but no sound at all Type Belt drive turntable, fully automatic The stylus guard is still in place. Platter Aluminum The tone arm Lift button is pressed in. Motor DC servo-controlled Speeds / 45 rpm Amplifier controls set incorrectly: wrong input select- Wow and flutter 0.25% WRMS...
  • Page 8 Visit our Web Site: www.audio-technica.com One-Year Limited Warranty Audio-Technica brand products purchased in the U.S.A. are warranted for one year from date of purchase by Audio-Technica U.S., Inc. ( A. T .U.S.) to be free of defects in materials and workmanship. In event of such defect, product will be repaired promptly without charge or, at our option, replaced with a new product of equal or superior value if delivered to A.

Table of Contents