Table of Contents
Advertisement
FIGURe 3.8. MOUNTING CAMCORDeR TO The ATN NVM-14
3. Connect the adapter (Figure 3.7, a) with the eyepiece and gen-
tly tighten three fixing screws (Figure 3.7, B) on the adapter.
I. MOUNTING The ATN NVM-14 TO The MIL-SPeC
hEAd MOUNT ANd MICh OR pASgT hElMET
MOUNT
to mount the atN NVM-14 to a head/helmet mount, perform the
following:
FIGURe 3.9. ATTAChING ADAPTeR TO ATN NVM-14
1. at tach the adapter (Figure 3.9, a) to the rail ( B ) of
atN NVM-14. push the clip (C) and slide the rail of monocular
into socket (D) of adapter. push the clip until the adapter will
lock the alignment groove in the monocular.
3-8
A
C
d
A
E
b
b
Advertisement
Table of Contents
