ATN NVM14 Operator's Manual page 48

lOCATION ITEM
ITEM
TO CheCK/SeR-
NO.
VICE
11 Socket
12 Socket
Headmount /
13 Helmet Mount
adapter
14 Weapon Mount
CAUTION
The demist coating on the demist shield can be damaged if
cleaned while wet or cleaned with wet lens paper. Clean only
when the demist shield is dry and only use dry lens paper.
15 Demist Shield
6-4
pROCEdURE
Inspect for dirt, dust, or cor-
rosion. Insert the rail of atN
NVM-14 into socket to verify
secure attachment of atN
NVM-14 to headmount. If
necessary, clean socket with
water.
press the socket-release but-
ton and check for free motion.
Inspect for damage.
Inspect for dirt, dust, or corro-
sion. Insert adapter into head-
mount or helmet mount socket
to verify secure attachment.
Inspect for dust, dirt, or cor-
rosion.
Inspect for dirt, dust, scratches
or damage. If necessary, clean
when shield is dry with dry lens
tissue only.
NOT FUNCTION-
INg AT OpTIMAl
lEVEl IF
Damaged, latch
won't work or
too loose.
Binding,
damaged or
non-operational
slide mecha-
nism.
Damaged,
will not latch
securely.
Damaged, will
not mount to
atN NVM-14 or
will not mount to
weapon mount
rail.
Damage or
scratches hinder
vision with atN
NVM-14 on.