Removal And Installation Of Chin Cup; Preparing For Extended Storage - ATN NVG-7 Operator's Manual

2. replace the chinstrap by using the Velcro tape on the left side of
the headband. lace the right straps into their respective sliding
bar buckles on the right side of the headband for correct lacing
(Figure 4-2).

4.4.3. REMOVAl AND INSTAllATION OF CHIN CUP

1. remove the c hinstrap ( Figure 4 - 3 ) by unsnapping the
Velcro tape from the left side of the headband.
2. replace the chin cup by sliding the cap on the chinstrap. Fix the
Velcro tape onto the place.
FIGURE 4-3. REMOVAl AND INSTAllATION OF CHIN CUP

4.4.4. PREPARING FOR ExTENDED STORAGE

to prepare the NVG-7 for extended storage, perform the following:
1. Check the goggles for serviceability as outlined in item 4.1 of this
manual.
2. remove the batteries.
3. Clean the goggles and accessories.
4. replace all items in the case.
4-8