Table of Contents
Advertisement
NOTE
Some of NVG-7 contain Flip-up Shutoff System. This system turns
the unit off when the NVG is upright on the flip-up head mount. To
turn the goggles back on, turn the switch button to ON again.
2.1.3. HElMET MOUNT INSTAllATION
Helmet mount for attachment of ATN's NVG-7 to a standard PASGT
helmet. Helmet mount fits securely onto helmet via a rugged strap-
ping device and grooved hooks. With helmet mount, NVG-7 can be
positioned directly in front of user's eyes or flipped.
A. Installation
1. Install the mount onto helmet as shown on the picture.
2. tighten and fixate the straps.
3. attach goggles to the rail. push button a and insert the bracket of
the NVG-7 to the rail of the mount.
4. place the helmet on your head.
SCreW
FIGURE 2-6. HElMET MOUNT INSTAllATION AND ADjUSTMENT
B. Adjustment
1. loosen the screw and move the unit along the rail for eye relief
adjustment. tighten the screw.
2. loosen the top vertical fixation screw. adjust goggles vertical po-
sition. tighten vertical position screw.
3. the NVG-7 helmet mount has a flip-up mechanism. push a but-
ton on the side of mount and lift the unit up till fixation in the top
position.
VertICal FIXatIoN
SCreW
BUttoN a
BUttoN B
StrapS
StrapS
2-5
Advertisement
Table of Contents
