You can change the position of the Ir
control panel to meet your your needs.
the wrench that is included in the set,
is used to loosen the nut located on the
body of the Ir. rotate the Ir to the de-
sired position. tighten the nut with the
wrench to secure the new position.
2.2.6. SHUT-DOwN OPERATIONS
1. Shot press button to turn the NVG-7 off. the green of the image
intensifier tube glow will fade to black.
2. replace the protective cap on the front lens.
2-16
WRENCH
to looSeN NUt
CoNtrol paNel
FIGURE 2-20. CHANGING OF
CONTROl PANEl POSITION
To TIGHTEN
NUt
NUt