Flip-Up Head Mount Installation - ATN NVG-7 Operator's Manual

2.1.2. FlIP-UP HEAD MOUNT INSTAllATION

A. Fitting the head mount
adjust the head mount first before attaching the NV unit to it.
1. loosen all the straps and place the head mount on your head.
2. Fit the head mount to your head size. tighten the back straps and
fixate it with Velcro tape.
3. then secure the top straps. this one is rather tight so you might
need to remove it from your head, when you are adjusting the
straps.
4. and last you will need to tighten the chin strap.
B. Goggles installation and adjustment
Now you are ready to mount the NV goggles onto head mount.
BACK STRAPS
CHIN STRAP
FIGURE 2-3. FlIP-UP HEAD MOUNT
FIGURE 2-4. HEAD MOUNT OF NVG-7
top StrapS BUttoN B
BUttoN a
SCreW
BRACKET
2-3