Table of Contents
Advertisement
1. loose two fixing screws of the ring.
2. turn the ring until the socket is directed straight down.
3. tighten the fixing screws.
4. Screw the tripod screw in to the tripod socket.
NOTE
Severe damage to the unit can occur if the tripod collapses or is
knocked over. It is recommended that the NVG-7 be removed if the
user is not within arm's reach of the tripod.
FIGURE 2-12. NVG-7 wITH 8x lENS ON THE TRIPOD
2.1.7. IR-450 INSTAllATION
Ir-450 can be mounted on the bracket of NVG-7.
1. loosen the Ir-450 fixing screw.
2-8
FIXING SCreWS
FIGURE 2-11. NVG-7 wITH 8x lENS
SoCKET
rING
Advertisement
Table of Contents
