Altusen KM0832 User Manual page 31

5. Use Cat 5 cable to connect KVM adapter cables to any available KVM
ports; plug the connectors on the KVM adapter cables into the keyboard,
video, and mouse ports of the computers you wish to install.
6. Plug the provided power cable into the power socket on the first-level
KM0832; connect the power cable to an AC power source with
appropriate voltage for the KM0832, then turn on the KM0832.
7. Wait one minute, and then repeat step 6 for each second-level KM0832.
8. Wait one minute, and then repeat step 6 for each third-level KM0832.
9. Plug the power adapters supplied with the console modules into an
appropriate AC power source, and then plug the power adapter cables into
the power jacks on the rear of the console modules.
10. Turn on the power to all the computers.
Cascaded KM0832 Installation Diagram
Console Module
Chapter 2. Hardware Setup
This product supports several console
module and KVM adapter cable types.
See Requirements, page 4, and
Additional Installation Diagrams,
page 133, for details.
21