ATCOM AX-4G Product Manual page 11

After running dahdi_genconf successfully, the dahdi-channels.conf file will get the following
configuration:
; Span 1: WCTDM/4 "ATCOM AX4G Board 5" (MASTER)
;;; line="1 WCTDM/4/0 FXSKS (SWEC: MG2)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 1
callerid=
group=
context=default
;;; line="2 WCTDM/4/1 FXSKS (SWEC: MG2)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 2
callerid=
group=
context=default
;;; line="3 WCTDM/4/2 FXSKS (SWEC: MG2)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 3
callerid=
group=
context=default
;;; line="4 WCTDM/4/3 FXSKS (SWEC: MG2)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 4
callerid=
group=
context=default
3. Please run dahdi_cfg –vv command.
www.atcom.cn 10