Multi-Homing Security Gateway User's Manual
Step 3: Go to Configuration > Dual WAN > Outbound Load Balance. Choose your load balance policy
and click Apply to apply your changes. If you selected Based on session mechanism as your policy, the
source IP address and destination IP address may go through WAN1 or WAN2 depending on policy
settings. If you selected Based on IP hash mechanism as your policy, the source IP address and
destination IP address will go through a specific WAN port according to the IP hash algorithm.
Step 4: Go to Configuration > Advanced > Dynamic DNS and input the dynamic DNS settings for WAN1
and WAN2.
- 115 -