On Screen Display Operation - Planet KVM-800 User Manual

3.4 On Screen Display Operation

When you pop up the OSD menu window go through the hot
key, you will see the following small window on your monitor.
BANK : 1
01 ☼SYSTEM 01
03 SYSTEM 03
05 SYSTEM 05
07 SYSTEM 07
OSD : 1 0 SEC.
SCAN: 1 0 SEC.
ESC : QUIT
TAB : NEXT
/ : SELECT PORT
PgDn/PgUp: BANK SELECT
ST
a. The 1 line bar is Bank no.
b. The 2nd block is your PC system name list. You will find
the system number list from 01 to 08. You can define your
PC name in maximum 8 characters. The factory default
of 8 port KVM switch is from "SYSTEM 01", "SYSTEM
02",..., "SYSTEM 08". Besides, the sun symbol " ☼ " near
to the PC name represents the PC system is powered on.
c. Use up arrow key "
port for destination PC name. After you have selected the
PC port already, you can press the ENTER Key to switch
the PC port you want immediately
02 SYSTEM 02
04 ☼SYSTEM 04
06 SYSTEM 06
08 ☼SYSTEM 08
CHANGE PASSWORD
CONSOLE ON/OFF
ENTER :COMPLETE
INSERT :EDIT
" or down arrow key "
19
" to select