Kvm Switch - Planet KVM-800 User Manual

Step 6 Connecting Mouse port of PC(s) to the

KVM Switch

Connect the first computer's mouse cable to the KVM Switch.
If using a PS/2 cable, connect one end to the PS/2 mouse port
on the computer, and the other end to the PS/2 mouse port on
the back of KVM Switch. If using a serial mouse cable
(optional), connect one end to a DB-9 serial port on the
computer, and the other end to the DB-9 serial mouse port on
the back of the KVM Switch. If you need Serial DB-9 to PS2
Mini Din 6 pin adapter, please contact your supplier.
Step 7 Connecting Keyboard port of PC(s) to the
KVM Switch
Connect the first computer's keyboard cable to the KVM
Switch. Using another PS/2 cable connect one end to PS/2
keyboard port on the computer, and the other end to the PC1
keyboard port on the back of KVM unit. If your computer has
an AT type keyboard port, you will need a PS/2 to AT keyboard
adapter.
Step 8 Check Again
Double-check all of the connections. You can check the color
of keyboard and mouse connector to make sure the keyboard
and mouse cables go to the correct ports.
The rear side of PC
The rear side of PC
10