3.1 Password Protection
When you power on KVM switch, it will ask you the password,
the default password is eight zero –" 00000000 ". Please
key in eight zero and enter the same value at retype field.
Note: Before you are not familiar with the operation of OSD
menu, please don't change the password – i.e. keep default
eight zero (00000000) value. Otherwise, if you have set the
password and unfortunately forget the password, you need
send it back to your distributor for maintaining the password.
3.2 Selecting PC through Push Buttons
8 port KVM Switch
1
2
3
Example:
To access a computer attached to Port 8 of the third Bank.
You can press Bank Select to choose the Bank No. and Port
Select to choose Port No.
Bank No.
3
0
Bank Status
Port Status
7-Segment LED Indication
You can press the button in order like mentioned-above
diagram.
Operation
4
5
6
Port No.
8
:
15
Chapter 3
7
8