4.4.3.2 Set trunk
This command allows disable or enable trunk function of FSD-804PS. The trunk function setting screen in
Figure 4-20
appears
Figure 4-20 Port Configuration screen
4.4.3.3 Set vlan [n]
This command allows configuring eight port-based VLAN groups of FSD-804PS. the correct usage is shown as below:
Set vlan [n]: n=1-8, to configuring eight port-based VLAN groups of FSD-804PS. The configuring port-based VLAN
groups screen in
Figure 4-21
appears
Figure 4-21 Port based VLAN Configuration screen
- 24 -