Planet BM-2010A User Manual page 8

LCD Panel: Used to make IP settings, view IP settings, reboot system, show service information, reset
password and reset all configuration. It also show the average bandwidth usage for past 10 seconds when not
in configuration mode. Check section "Initial Setup by LCD panel" for detail on IP settings. The following
table shows the button function.
Button Function
(Enter) Used to select or confirm the selection
(ESC) Used to cancel the selection or back to previous
manual
(▲) Change to previous option or increase the
number. Press longer to increase the number by
10.
(▼) Change to next option or decrease the number.
Press longer to decrease the number by 10.
LED Panel: Used to show the system and connection status. The following table show the connection LED
definition.
LED
PWR Lit Green
STATUS Lit Red
LAN/ LNK/ Lit Green
WAN ACT Blink Green Packets are transmitting or receiving on LAN or WAN port
10/ Lit Amber
100
Off
Status Meaning
Indicates the device is receiving power
Indicates the device is reading data from memory
Link is established on LAN or WAN port
Indicates the link operate on 100Mbps
Indicates the link operate on 10Mbps
BM-2010A / BM-2100 Bandwidth Manager User's Manual
- 4 -