Planet BM-2010A User Manual page 33

BM-2010A / BM-2100 Bandwidth Manager User's Manual
Press "New" or Modify button, the access list configuration page will be shown as the following.
Order: Access List processing sequence. When the Bandwidth Manager receives a packet, it will find the
packet's Source Host, Destination Host and Service and check which Access List the packet applies.
Order 1 will be the first list to check and so on. When the Bandwidth Manager find a list fit to the packet, it
will stop the checking and accept or deny the packet. Thus, always put mission-critical traffic list in the
front to get higher performance.
Source Host: The source host that you want to control. You have to first define the source host on host
catalog. This is the host(s) which originates the network service request. It can be on LAN(internal) or
WAN(external) side.
Destination Host: The destination host that you want to control. You have to first define the destination
host on host catalog. This is the host(s) which receives the network service request. It can be on
LAN(internal) or WAN(external) side.
Service: The service that you want to control. The services must be defined on the service catalog.
Policy: Accept or deny this access list.
Save/Cancel: Press "Save" button to save above configurations and "Cancel" button to discard your
configurations.
- 29 -