Philips WP3870 User Manual page 14

English
14
6 Now you can lift the filter holder release lever.
7 Remove the filter holder from the wall holder.
8 Unscrew the cap from the filter holder.
9 Pull the filter from the cap.
10 If necessary, clean the inside of the filter holder with the water
you collected before.
Do not open the main water valve until after you have placed the filter
holder with filter and the water reservoir back onto the wall holder.
11 Attach a new filter to the cap and place the filter with cap in the
filter holder. Screw the cap back onto the filter holder.
Note: Always replace the filter with an original Philips replacement filter, type
WP3970.