Philips WP3870 User Manual page 10

English
10
2
1
12 Unscrew the swivel nut from the water supply connector and slide it
on the hose.
13 Push the end of the hose onto the water supply connector and
tighten the swivel nut.
Preparing for use
Now that the wall holder is attached to the wall, proceed as follows to
prepare the water purifier for first use.
1 Unscrew the cap from the filter holder. Take the filter out of its
packaging and attach it to the cap of the filter holder. Place the filter
with cap into the filter holder and screw the cap onto the filter
holder.
2 Pull the filter holder release lever forward (1) and lift it up (2).
3 Place the filter holder with filter into the wall holder.