Using A Satellite Receiver; Manual Tv Channel Search - Philips ShowView DVDR70 Operating Instructions Manual

Installing your DVD recorder
Â
Check if the displayed settings for '
correct.
Ã
When all information is correct, save by pressing OK .
The initial installation is now complete.
If you are connecting a satellite receiver, please read the section on 'Using a
satellite receiver'.
If you are connecting a decoder, you must install it as described in the next
section.
a
b If the sound is distorted on any of the stored TV channels or if there is no
sound at all, the wrong TV system may have been stored for the TV
channel. Read 'Manual TV channel search' for information on how to
change the TV system.
TV channels from a satellite receiver (connected to scart socket EXT 2 AUX-I/O ) are received
on the DVD recorder on programme number '
If necessary, use the MONITOR button to switch to the internal tuner.
Select programme number '
' with CH- B .
number '
You should select the TV channels to be received by the satellite receiver directly on the
receiver itself.
', ' ' and '
'
' with 0 on the remote control and then select programme
' are