User Preferences - Philips ShowView DVDR70 Operating Instructions Manual

K
In this section you will learn how to set your user preferences on the DVD recorder. The
symbols have the following meanings:
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Press
appears.
3
Select '
4
Select the appropriate function with CH- B or CH+ A and confirm
with C .
5
Select the appropriate line using CH- B or CH+ A and confirm
with C .
6
Select the appropriate function using CH- B or CH+ A or the
setting with D or C .
7
Confirm the new setting by pressing OK .
8
To close the menu item, press D .
You can choose the following features in this menu:
The picture signal from your DVD Recorder can be set to match your TV screen.
: for a 'wide-screen' picture with black bars at the top and bottom
' ': for a full-height picture with the sides trimmed.
ï
' ' : for a wide-screen TV set (screen edge ratio 16:9)
Adapts the colour dynamics for NTSC playback
SYSTEM-MENU on the remote control. The menu bar
' using D or C and confirm with CH- B .

User preferences