Philips ShowView DVDR70 Operating Instructions Manual page 74

1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Press TIMER on the remote control.
The programming mode selected last is marked.
3
' using CH- B or CH+ A and confirm with C .
Select '
4
Select the programmed recording (TIMER) you want to check, change
or delete with CH- B or CH+ A .
1
Press the CLEAR button.
2
Confirm with OK . '
screen.
'-- ---' appears rather than the displayed values
3
To end, press TIMER .
5
Press C .
Select the input field with D or C .
If required, change the information with CH+ A , CH- B or the
number buttons 0..9 .
6
Confirm with OK .
7
To end, press TIMER .
8
Switch off with STANDBY m .
This DVD recorder is equipped with the 'NexTView Link' feature. If your television is also
equipped with this function, you can mark TV programmes on the television for programming.
These TV programmes will automatically be transmitted to a TIMER block on the DVD
recorder. If you clear the marking of the TV programme on the television, the corresponding
TIMER block on the DVD recorder will also be cleared.
For more information, read the instruction manual of your TV set.
' will briefly appear on the TV
Programming a recording (TIMER)