Introduction; Creating An Ethernet Transport; Creating A Dsl Link - Patton electronics DiamondLink 3201 User Manual

Model 3201 G.SHDSL Integrated Access Device User Guide

Introduction

Network Address Translation (NAT) provides unlimited local host addresses, enabling users to connect to the
Internet without having to provide a new address for each and every host. An encryption capability helps keep
actual addresses confidential. This chapter describes how to configure for NAT.

Creating an Ethernet Transport

1. From Console on the Remote unit configure the following:
2. From Console on the Central unit configure the following:
Now you should be able to reach the unit through the Ethernet port from the local side using Telnet or the
WWW interface. This instructions in this procedure are intended for the WWW interface.

Creating a DSL Link

You will need the following to create a DSL link:
• One Model 3201 unit configured as Remote
• One Model 3201 unit configured as Central

Introduction

7 • NAT (Network Address Translation)
93