Panasonic KX-T7400 Series User Manual Addendum page 53

Other changed items
Section of O/I
2.2 Initial Settings
2.3 Making Calls
2.3 Making Calls
2.3 Making Calls
2.3 Making Calls
2.5 During a
Conversation
2.5 During a
Conversation
2.6 Others
Feature Title
Customising the
Buttons on Your
Telephone
Quick Dialling
Dialling with a Station
Speed Dialling Button
(Station Speed
Dialling)
Dialling Simply by
Going Off-Hook
(Pickup Dialling)
Dialling the Stored
Number with a SAVE
Button (Notebook
Function)
Quick Dialling
Dialling with a SAVE
Button in Memo
(Notebook Function)
Transferring Calls
Call Waiting
Alarm Setting
(Timed Reminder)
Please change the PROGRAMMING INPUT for the
FUNCTION "Log-in/Log-out" from "8" into "80".
Please replace as follows in the conditions;
•....Enter " " for a "-" (hyphen).
• Enter " " for a PAUSE.
• If there is a PAUSE in the assigned numbers, the
numbers after the PAUSE are sent as DTMF
signals.
Please change as follows.
• When you store the phone number, you don't have
to dial ISDN port access code (9, 81or 82).
• The ISDN port access numbers are '9','81' and '82'.
For the operation, Transferring a Call to CO Line
(Call Transfer — to CO Line), you must perform the
following operations, Wait for an answer and
Announce, even though the manual states "Omit if
not necessary." Please execute in proper order.
If the operation below is performed, the current call
will be held instead of being terminated.
PT
While hearing a Call Waiting tone;
CO
OR
Press flashing CO or INTERCOM.
Please add the following condition;
• If you receive an incoming call, ringing starts after the alarm
stops sounding.
• If you receive an incoming outside call in the 1:N status during
the alarm, the ringing starts after the alarm stops sounding.
Item
INTERCOM
Talk to the
new caller.
53