Panasonic KX-T7400 Series User Manual Addendum page 36

2.6 Others
D
isplay while dialling
Off-hook or press SP-PHONE and dial
an outside line access code + a phone
number.
! • If the other party doesn't answer, displays for the other party's COLP number and Charge
!
Information are skipped.
• Your CLIP number is programmable by System Programming [404].
• Before the calling party answers, the other party's COLP number and the charge
information are displayed.
• As soon as the charge information is received, the information is shown on the display and
the display after this starts from the dialled phone number (*) again. (See the above chart.)
• You can modify and call back the logged numbers. Refer to the "Recording the Caller's
Information Automatically (Incoming Call Log).
36
CO 01
CONT
Press
*
384010
CONT
Press
If the other party answers,
384010
CONT
Press
CO 01
CONT
CO
Press to
change the display.
Press
0202020202
CONT
Press
If the other party answers,
CO01:
CONT
Press
CO01:
CONT
dialled phone number
384010
Manual dialling
– 15 seconds after
changes
Pressing REDIAL button
automatically
– Immediate
Other quick diallings
– 10 seconds after
call duration
12:00'30
TRM ACCNT
CO
to change the display.
dialled phone number
TRM ACCNT
CO
to change the display.
calling party's COLP
TRM ACCNT
number
CO
to change the display.
call duration
12:00'30
TRM ACCNT
CO
to change the display.
your CLIP number
TRM ACCNT
(Skipped if not assigned.)
CO
to change the display.
Charge
£ 17.0
TRM ACCNT
CO
to change the display.
Units
180
TRM ACCNT