System Management - Panasonic KX-T7400 Series User Manual Addendum

Digital super hybrid system
Hide thumbs Also See for KX-T7400 Series:
Table of Contents

Advertisement

3.1

System Management

LCR Programming consists of the following items:
Common Table
(1) LCR Mode (Program [700])
This program is used to turn on or off the LCR mode. If turned on, calls are sent to the
least expensive route to be used. (Default=Disable)
(2) BTL Access Code Set (Program [705])
This program is used to store the British Telecom Line (BTL) Access Code.
(Default=121) If the code is dialled, BTL is always selected even if the LCR mode is
enabled.
(3) LCR Leading Digit Entry (Program [707])
This program is used to store the leading digits of an area code to judge whether to select
a route for the LCR feature.
LCR Routing Plan Tables (Routes 1 through 4)
(1) LCR Carrier Code (Program [701])
This is used to store each carrier's access code.
(2) LCR Route Selection Code (Program [702])
This is used to store area codes used for the LCR feature.
(3) LCR Authorization Code (Program [703])
This is used to register an authorization code applied to each ISDN line and each route.
(4) LCR Itemized Bill Code (Program [704])
This is used to assign whether to send an itemised bill code of an extension to each
ISDN line or not. The itemised bill code corresponds to each extension number 21–28
and 30–34.
(5) LCR Route Exceptional Code (Program [706])
This is used to store dialling numbers that are excepted from LCR routing plans of a
specified carrier.
(6) LCR Modify Removed Digit (Program [708])
This is used to remove the digits of the dialled number before sending to the exchange
line.
(7) LCR Modify Added Number (Program [709])
This is used to add the number to the dialled number before sending to the exchange
line.
The dialled number is modified for sending out to the least expensive carrier. See below as an example.
Dialled Number
092-477-7777
By [708] LCR
Modify Removed
Digit, 1 digit is
removed.
92-477-7777
* For the example above, the carrier code, authorization code and itemized
bill code are omitted.
By [709] LCR
Modify Added
Number, 123 are
added.
The number transmitted
to the network
12392-477-7777
49

Advertisement

Table of Contents
loading

Table of Contents