Selecting The Clip/Colp Numbers - Panasonic KX-T7400 Series User Manual Addendum

2.6 Others
• System Programming (Section 3.4)
[107] Charge Indication Selection
• ISDN Port Programming (Section 3.7)
[404] CLIP / COLP Number Assignment
• System Programming (See page 48 in this manual)
[902] System Additional Information

Selecting the CLIP/COLP numbers

You can select the CLIP/COLP numbers to be displayed to the other party depending on
business or private use.
S
etting the CLIP numbers
Any Telephone
Off-hook.
S
etting the COLP numbers
Any Telephone
Off-hook.
! • Your CLIP number will be displayed if the number is assigned by the System
!
Programming [404].
• Caller Identification (Caller ID) services can be denied depending on your COS level.
• If you select the same setting previously selected, a confirmation tone 2 and dial tone will
be sent.
• ISDN Port Programming (Section 3.7)
[404] CLIP / COLP Number Assignment
• COS Programming (Section 3.8)
[512] Calling Line Identification Restriction (CLIR)
[513] Connected Line Identification Restriction (COLR)
• Extension Programming (Section 3.9)
[601] Class of Service
1 business use
private use
6 1
2
Dial 61. Dial 1 or 2.
business use
1
private use
6 2 2
Dial 62. Dial 1 or 2.
Confirmation tone On-hook.
Confirmation tone On-hook.
37