Operation - Panasonic KX-TA1232 Installation Manual

3.1.3 Operation

PROBLEM
• When using the
speakerphone mode with a
proprietary telephone KX-
T7135, KX-T7130 or KX-
T7030, nothing is audible.
• The unit does not ring.
• During a power failure,
extensions connected to
jack numbers 1, 9 and 17
for KX-TA1232 do not
operate.
• Originating an outside call,
Call Transfer, or
Conference cannot be
performed.
Installation Manual
PROBABLE CAUSE
• The HANDSET /
HEADSET selector of the
KX-T7135, KX-T7130 or
KX-T7030 is set to the
"HEADSET" position.
• The Ringer Volume
Selector is set to "OFF".
• An analog proprietary
telephone (APT) is
connected to the jack.
• The dialing mode (tone or
pulse) is improper.
• The corresponding CO
button does not exist on the
proprietary telephone.
POSSIBLE SOLUTION
• When the headset is not used, set the
HANDSET / HEADSET selector to
the "HANDSET" position.
• Set to "HIGH" or "LOW".
• Disconnect the APT and connect a
single line telephone.
• Set the Tone / Pulse switch to the
other position.
• Program the CO button. See Section
[005] Flexible CO Button
Assignment.
Troubleshooting
91