Panasonic KX-TA1232 Installation Manual page 68

General Installation
Amphenol 57JE Type (screw-attach-type 50-pin connector) Connection for KX-TA123270
To fix the Amphenol 57JE type (screw-attach type 50-pin connector) to the 8 Extension
Expansion Unit, follow the procedure below.
1.
The 50-pin connector (Jack) on the Expansion Unit has two hook-pins. Remove the upper
hook-pin, and take out the screw.
Note
When installing a connector like the type shown below, unscrew the lower hook-pin also. Then
drive both accessory screws.
50-pin
connector
68
50-pin
connector
Hook-pins
Accessory screw
Amphenol 57JE type
Accessory
screw
Screw
Installation Manual